What the Quote Actually Covers in the Distributor Tier Program
A US buyer of alloy Rings sent us a competitor's alloy Ring in April with one question: why does this fail at nickel release after a season. We measured it, rebuilt the spec around plating thickness per batch and nickel release compliance, and shipped 800 alloy Rings that cleared inspection with zero rejects, quoted at USD 1-17 per piece in bulk carton, 50 per bag.
At 800 pieces the buyer was not buying a defect, they were buying a document. The Distributor Tier order carried a photo and a price, and nickel release had nowhere to live, quoted at USD 1-17 per piece in bulk carton, 50 per bag.
Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, and the Distributor Tier quote for it sits at USD 1-17.
Cost Split on a Distributor Tier Piece at USD 1-17
At USD 1-17 per piece for alloy Rings, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for alloy Rings | 32% | Alloy choice and casting yield |
| Stone or melee for alloy Rings | 23% | Sieve range and lot batching |
| Setting and finishing labor for alloy Rings | 21% | Jig design and bench minutes |
| Plating, polish and QC for alloy Rings | 14% | Per-tray versus per-piece checks |
| Packaging for alloy Rings | 10% | bulk carton, 50 per bag |
The saving in the cheapest alloy Rings quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, quoted at USD 1-17 per piece in bulk carton, 50 per bag.
Four Spec Lines a Distributor Tier Buyer Checks
Most quotes describe the alloy Ring and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 1-17.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, which is how the Distributor Tier account reads it at USD 1-17.
Distributor Pricing Tiers on alloy Rings
A distributor does not buy a alloy Ring, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, which the Distributor Tier file records at USD 1-17 in bulk carton, 50 per bag.
Turn is the number the distributor manages. At USD 1-17 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of alloy Rings move in 800-piece lots rather than in the 50-piece sample quantity.
Three Failures That Reach the Distributor Tier Bench
nickel release
EU and some US buyers require nickel-release compliance. A plating bath that passes on day one can fail after a barrel top-up, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Our countermeasure is a gauge and a written limit. It adds about 8 seconds per piece and removes the defect from the run rather than from the carton, which the Distributor Tier file records at USD 1-17 in bulk carton, 50 per bag.
plating thickness drift
A 3 micron layer survives a season; a 1.5 micron layer does not. Thickness is measurable and should be stated per batch, on a 800-piece Distributor Tier order at USD 1-17.
In a 800-piece run this typically shows on 17 of pieces. Catching it means measuring plating thickness per batch at the tray level, not inspecting the finished carton, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
stone setting speed
Glue-set stones that pool adhesive above the seat photograph as a white dot. Recessed seats fix it at the bench, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
The commercial effect is chargebacks and listing takedowns, typically USD 2-5 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as bulk carton, 50 per bag and certified SGS batch report.
Terms Behind a Distributor Tier Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 1-17 for the 800-piece Distributor Tier run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 1-17 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is USD 1-17 on the Distributor Tier schedule.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of plating thickness per batch for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, on a 800-piece Distributor Tier order at USD 1-17.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, on a 800-piece Distributor Tier order at USD 1-17.
Sample to Container: The Real Calendar
The figure below is what we quote for alloy Rings, and it is deliberately narrower than the market average, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
One practical note on timing for alloy Rings: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, priced at USD 1-17 for the 800-piece Distributor Tier run.
We date the alloy Rings proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, quoted at USD 1-17 per piece in bulk carton, 50 per bag.
AQL, Tray Checks and What a QC Report Should Say
Most alloy Rings disputes we arbitrate trace back to this line, not to the defect itself, on a 800-piece Distributor Tier order at USD 1-17.
In the US market terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For alloy Rings, we publish the figure per SKU and hold it for the order window rather than for the calendar year, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 1-17.
Practically, it shows up in three places for alloy Rings: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, which is USD 1-17 on the Distributor Tier schedule.
The Calendar Behind a Distributor Tier Run
For bulk carton, 50 per bag at 800 pieces, the sequence is fixed and the dates are the only thing that moves, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
MOQ stays at 50 pieces per design on alloy Rings, low enough to test a shelf and high enough to keep the gauge check independent, the figure being USD 1-17 for a 800-piece run.
Getting bulk carton, 50 per bag to the US market
Export runs through Guangzhou or Shenzhen. For Distributor Tier orders the SGS batch report file travels with the shipping documents, not separately, on a 800-piece Distributor Tier order at USD 1-17.
The clearance term matters more than the rate at 800 pieces. A duty surprise can cost more than the whole freight line, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against plating thickness per batch and nickel release compliance, which is USD 1-17 on the Distributor Tier schedule.
The First Distributor Tier Order
The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, on a 800-piece Distributor Tier order at USD 1-17.
The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, which the Distributor Tier file records at USD 1-17 in bulk carton, 50 per bag.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white alloy Rings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is how the Distributor Tier account reads it at USD 1-17.
How is alloy Rings packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and at USD 1-17 for 800 pieces that is the number the buyer signs.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Distributor Tier quote for it sits at USD 1-17.
How long does a reorder of the same alloy Ring take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is USD 1-17 on the Distributor Tier schedule.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white alloy Rings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is how the Distributor Tier account reads it at USD 1-17.
Next Step
If the USD 1-17 band fits your shelf, send the drawing and we will quote the 800-piece Distributor Tier run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across alloy Rings and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Related reading: Alloy Rings Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME Fashion Necklaces Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME