AQL, Tray Checks and What a QC Report Should Say in the Valentine Program Program
A US buyer of alloy Rings sent us a competitor's alloy Ring in July with one question: why does this fail at nickel release after a season. We measured it, rebuilt the spec around plating thickness per batch and nickel release compliance, and shipped 300 alloy Rings that cleared inspection with zero rejects, and at USD 2-20 for 300 pieces that is the number the buyer signs.
At 300 pieces the buyer was not buying a defect, they were buying a document. The Valentine Program order carried a photo and a price, and nickel release had nowhere to live, shipped as heart gift box and certified IGI report.
Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, which is how the Valentine Program account reads it at USD 2-20.
Four Spec Lines a Valentine Program Buyer Checks
Most quotes describe the alloy Ring and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, which the Valentine Program file records at USD 2-20 in heart gift box.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, quoted at USD 2-20 per piece in heart gift box.
Cost Split on a Valentine Program Piece at USD 2-20
At USD 2-20 per piece for alloy Rings, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for alloy Rings | 32% | Alloy choice and casting yield |
| Stone or melee for alloy Rings | 23% | Sieve range and lot batching |
| Setting and finishing labor for alloy Rings | 21% | Jig design and bench minutes |
| Plating, polish and QC for alloy Rings | 14% | Per-tray versus per-piece checks |
| Packaging for alloy Rings | 10% | heart gift box |
The saving in the cheapest alloy Rings quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, the figure being USD 2-20 for a 300-piece run.
Terms Behind a Valentine Program Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 300-piece Valentine Program order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is USD 2-20 on the Valentine Program schedule.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 2-20 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the heart gift box format at 300 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, the figure being USD 2-20 for a 300-piece run.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of plating thickness per batch for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, the figure being USD 2-20 for a 300-piece run.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, priced at USD 2-20 for the 300-piece Valentine Program run.
Three Failures That Reach the Valentine Program Bench
nickel release
EU and some US buyers require nickel-release compliance. A plating bath that passes on day one can fail after a barrel top-up, shipped as heart gift box and certified IGI report.
Our countermeasure is a gauge and a written limit. It adds about 8 seconds per piece and removes the defect from the run rather than from the carton, certified IGI report and packed heart gift box at 300 pieces.
plating thickness drift
A 3 micron layer survives a season; a 1.5 micron layer does not. Thickness is measurable and should be stated per batch, priced at USD 2-20 for the 300-piece Valentine Program run.
In a 300-piece run this typically shows on 17 of pieces. Catching it means measuring plating thickness per batch at the tray level, not inspecting the finished carton, which is USD 2-20 on the Valentine Program schedule.
stone setting speed
Glue-set stones that pool adhesive above the seat photograph as a white dot. Recessed seats fix it at the bench, shipped as heart gift box and certified IGI report.
The commercial effect is chargebacks and listing takedowns, typically USD 2-5 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is USD 2-20 on the Valentine Program schedule.
AQL, Tray Checks and What a QC Report Should Say
Every year we see the same omission in alloy Rings spec sheets, and every year it costs a buyer a season, the figure being USD 2-20 for a 300-piece run.
At 300 pieces the arithmetic on alloy Rings changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, with IGI report and heart gift box stated on the same sheet.
We quote both a first-run price and a reorder price for alloy Rings on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, the figure being USD 2-20 for a 300-piece run.
Carton Cube, Duty and the Freight Line That Surprises Buyers
The number is less interesting than the rule behind it, and alloy Rings is where that rule gets tested, the figure being USD 2-20 for a 300-piece run.
One practical note on timing for alloy Rings: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, and 300 pieces leaves Wuzhou in heart gift box at USD 2-20.
We date the alloy Rings proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, the figure being USD 2-20 for a 300-piece run.
Valentine Window for alloy Rings
The Valentine window is short and unforgiving: stock has to be in the warehouse by the last week of January or the season is gone. That puts the production order in the second week of December, ahead of the Lunar New Year slowdown, which is how the Valentine Program account reads it at USD 2-20.
Paired designs move better than single pieces here. A matching pair of alloy Rings, boxed together with two cards, converts at the same retail price as two singles and costs about nine percent more to make, the figure being USD 2-20 for a 300-piece run.
Photography has to be red-and-white neutral. A alloy Ring shot on a red silk background reads as a gift in a listing thumbnail, and that is the only image most buyers will ever see, shipped as heart gift box and certified IGI report.
The Calendar Behind a Valentine Program Run
For heart gift box at 300 pieces, the sequence is fixed and the dates are the only thing that moves, and the Valentine Program quote for it sits at USD 2-20.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
MOQ stays at 50 pieces per design on alloy Rings, low enough to test a shelf and high enough to keep the gauge check independent, and at USD 2-20 for 300 pieces that is the number the buyer signs.
The First Valentine Program Order
The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, priced at USD 2-20 for the 300-piece Valentine Program run.
The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, and the Valentine Program quote for it sits at USD 2-20.
Getting heart gift box to the US market
Export runs through Guangzhou or Shenzhen. For Valentine Program orders the IGI report file travels with the shipping documents, not separately, the figure being USD 2-20 for a 300-piece run.
The clearance term matters more than the rate at 300 pieces. A duty surprise can cost more than the whole freight line, shipped as heart gift box and certified IGI report.
The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against plating thickness per batch and nickel release compliance, with IGI report and heart gift box stated on the same sheet, with IGI report and heart gift box stated on the same sheet.
Frequently Asked Questions
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and 300 pieces leaves Wuzhou in heart gift box at USD 2-20.
What is the minimum order for alloy Rings?
50 pieces per alloy Ring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and 300 pieces leaves Wuzhou in heart gift box at USD 2-20.
Do you supply certificates for alloy Rings?
IGI report on alloy Rings above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of plating thickness per batch, which is what a counter or a listing actually needs, and at USD 2-20 for 300 pieces that is the number the buyer signs.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if nickel release shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which the Valentine Program file records at USD 2-20 in heart gift box.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and 300 pieces leaves Wuzhou in heart gift box at USD 2-20.
Next Step
If the USD 2-20 band fits your shelf, send the drawing and we will quote the 300-piece Valentine Program run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across alloy Rings and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, and the Valentine Program quote for it sits at USD 2-20.
Related reading: Alloy Rings Made to Order: Carton Cube, Duty and the Freight Line That Surprises Buye - HOLYCOME Fashion Necklaces Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME