Budget Earrings Private Label Carton: Alloy, Karat and the Cost of a Color Change - HOLYCOME
Budget Earrings · November 9, 2026 · 11 views

Budget Earrings Private Label Carton: Alloy, Karat and the Cost of a Color Change - HOLYCOME

Why the Private Label Carton Quote Looks Cheap Until It Lands

In February, a US buyer of budget Earrings ordered 200 budget Earrings and asked for the same cast or stamped as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, quoted at USD 2-21 per piece in private-label carton with hangtag.

The defect did not surprise us. Nickel release is the predictable output of a run where nobody wrote the tolerance down, and it is the first measurement we take on an incoming budget Earring, on a 200-piece Private Label Carton order at USD 2-21.

Budget Earrings wholesale piece from the HOLYCOME line in Wuzhou

We did not discount the quote. We changed the gauge, the seat cut, the plating log and the tray rule, and the second run shipped with zero rejects on plating thickness per batch and nickel release compliance, with GRA report and private-label carton with hangtag stated on the same sheet, certified GRA report and packed private-label carton with hangtag at 200 pieces.

The Measurements Behind a USD 2-21 Quote

Price is the first thing compared and the last thing that matters. These four measurements decide the return rate on budget Earrings, and three of them cost nothing to specify, priced at USD 2-21 for the 200-piece Private Label Carton run.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone colour consistencyGraded by eye under D65Colour matched to a retained master stone, per trayRepeat colour complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

Each line is a gauge, not a slogan. A supplier who cannot quote a number for nickel release is quoting an opinion about budget Earrings, and the Private Label Carton quote for it sits at USD 2-21.

Private Label Packaging for budget Earrings

Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, which the Private Label Carton file records at USD 2-21 in private-label carton with hangtag.

Budget Earrings setting and finish detail on a HOLYCOME factory sample

The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin budget Earring. Below 0.8 mm of shank width we recommend the hangtag only, which is how the Private Label Carton account reads it at USD 2-21.

Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, the figure being USD 2-21 for a 200-piece run.

What a USD 2-21 Quote Hides

The Private Label Carton price of 200 pieces splits as below. The line buyers challenge is labor, and it is the line that decides the second season, priced at USD 2-21 for the 200-piece Private Label Carton run.

Cost lineShareWhat moves it
Base metal or alloy for budget Earrings34%Alloy choice and casting yield
Stone or melee for budget Earrings25%Sieve range and lot batching
Setting and finishing labor for budget Earrings22%Jig design and bench minutes
Plating, polish and QC for budget Earrings15%Per-tray versus per-piece checks
Packaging for budget Earrings4%private-label carton with hangtag

Break the USD 2-21 quote into these five lines and the comparison stops being rhetorical.

What Fails First on budget Earrings

stone setting speed

Glue-set stones that pool adhesive above the seat photograph as a white dot. Recessed seats fix it at the bench, which the Private Label Carton file records at USD 2-21 in private-label carton with hangtag.

Our countermeasure is a gauge and a written limit. It adds about 8 seconds per piece and removes the defect from the run rather than from the carton, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 2-21.

nickel release

EU and some US buyers require nickel-release compliance. A plating bath that passes on day one can fail after a barrel top-up, which the Private Label Carton file records at USD 2-21 in private-label carton with hangtag.

In a 200-piece run this typically shows on 17 of pieces. Catching it means measuring plating thickness per batch at the tray level, not inspecting the finished carton, which the Private Label Carton file records at USD 2-21 in private-label carton with hangtag.

plating thickness drift

A 3 micron layer survives a season; a 1.5 micron layer does not. Thickness is measurable and should be stated per batch, and at USD 2-21 for 200 pieces that is the number the buyer signs.

The commercial effect is chargebacks and listing takedowns, typically USD 2-5 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, certified GRA report and packed private-label carton with hangtag at 200 pieces.

MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with GRA report and private-label carton with hangtag stated on the same sheet.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 2-21 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Private Label Carton file records at USD 2-21 in private-label carton with hangtag.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of plating thickness per batch for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, priced at USD 2-21 for the 200-piece Private Label Carton run.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and at USD 2-21 for 200 pieces that is the number the buyer signs.

The Sample Approval That Survives Production

The figure below is what we quote for budget Earrings, and it is deliberately narrower than the market average, which the Private Label Carton file records at USD 2-21 in private-label carton with hangtag.

The commercial version of this question for budget Earrings is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, and the Private Label Carton quote for it sits at USD 2-21.

That clause matters more than a discount on budget Earrings. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, on a 200-piece Private Label Carton order at USD 2-21.

How the Second Order Becomes Cheaper

Most budget Earrings disputes we arbitrate trace back to this line, not to the defect itself, and at USD 2-21 for 200 pieces that is the number the buyer signs.

We run this check per tray rather than per carton because the defect that matters on budget Earrings is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, priced at USD 2-21 for the 200-piece Private Label Carton run.

The report the buyer receives states the count per tray, the measured average and the outlier count for budget Earrings. It is deliberately unglamorous, and it is the document that settles most disputes before they start, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 2-21.

From Spec to private-label carton with hangtag

On 200 pieces of budget Earrings the calendar starts at the signed spec, not at the deposit, and it ends with private-label carton with hangtag on a pallet, on a 200-piece Private Label Carton order at USD 2-21.

  1. Agree the stamp position, the hangtag copy and the box print before the first carton.
  2. Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
  3. Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
  4. Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
  5. Hold a retained carton as the pack reference for every reorder.

A 50-piece first order at USD 2-21 is a measurement of plating thickness per batch, not a commitment to the range.

A 200-Piece Test Run

A test run at 50 pieces tells you three things: whether nickel release is controlled, whether packing survives freight, and whether the count is honest, and at USD 2-21 for 200 pieces that is the number the buyer signs.

Put the reject rule in writing before the deposit. The Private Label Carton conversation after arrival is shorter when the rule is already on the order, the figure being USD 2-21 for a 200-piece run.

The Dock Check on budget Earrings

Air lands in 5-8 days to the US west coast and sea takes three times the transit. At USD 2-21 per piece the choice is a cash-flow decision.

DDP is available for US accounts that want duty and clearance on our side, and it removes the invoice that arrives after the carton clears, the figure being USD 2-21 for a 200-piece run.

On arrival, weigh a tray and measure ten pieces. Anything outside the band is a claim with evidence rather than a difference of opinion, shipped as private-label carton with hangtag and certified GRA report, which is USD 2-21 on the Private Label Carton schedule.

Frequently Asked Questions

What is the minimum order for budget Earrings?

50 pieces per budget Earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and the Private Label Carton quote for it sits at USD 2-21.

Do you supply certificates for budget Earrings?

GRA report on budget Earrings above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of plating thickness per batch, which is what a counter or a listing actually needs, and the Private Label Carton quote for it sits at USD 2-21.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if nickel release shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, priced at USD 2-21 for the 200-piece Private Label Carton run.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, on a 200-piece Private Label Carton order at USD 2-21.

What is the minimum order for budget Earrings?

50 pieces per budget Earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and the Private Label Carton quote for it sits at USD 2-21.

Next Step

Send a photo or a drawing of the piece you want in private-label carton with hangtag. We answer with a price, a calendar and the four measurements above, and the Private Label Carton quote for it sits at USD 2-21.

The factory behind budget Earrings here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, which is how the Private Label Carton account reads it at USD 2-21.

Related reading: Bracelets & Bangles Vermeil Upgrade: What a Report Proves and What It Does Not - HOLYCOME Bracelets & Bangles Valentine Program: AQL, Tray Checks and What a QC Report Should S - HOLYCOME

Request Wholesale Quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Related Articles