Budget Earrings Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME
Budget Earrings · November 9, 2026 · 9 views

Budget Earrings Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME

Trade Show Sampling for budget Earrings

A trade show converts on the sample that leaves the booth, not on the catalogue that gets left behind. The sample card has to carry the model number, the metal, the stone size, the FOB price and the MOQ, or the follow-up email starts from zero, quoted at USD 2-19 per piece in display tray with sample card.

Ten to twelve pieces on a tray is the useful number for budget Earrings. More than that and the buyer photographs instead of touching, and a photograph is not an order, which is how the Trade Show Sample account reads it at USD 2-19.

Budget Earrings wholesale piece from the HOLYCOME line in Wuzhou

The follow-up window is seven days. After that the card sits in a stack. We write the quote the same week and put the sample in the post so the buyer has the piece on the desk when the price arrives, quoted at USD 2-19 per piece in display tray with sample card.

MOQ, Mixed Designs and the Real First Order in the Trade Show Sample Program

A US buyer of budget Earrings sent us a competitor's budget Earring in September with one question: why does this fail at nickel release after a season. We measured it, rebuilt the spec around plating thickness per batch and nickel release compliance, and shipped 100 budget Earrings that cleared inspection with zero rejects, shipped as display tray with sample card and certified GRA report.

At 100 pieces the buyer was not buying a defect, they were buying a document. The Trade Show Sample order carried a photo and a price, and nickel release had nowhere to live, which is USD 2-19 on the Trade Show Sample schedule.

Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, and the Trade Show Sample quote for it sits at USD 2-19.

Budget Earrings setting and finish detail on a HOLYCOME factory sample

Four Spec Lines a Trade Show Sample Buyer Checks

Most quotes describe the budget Earring and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, and 100 pieces leaves Wuzhou in display tray with sample card at USD 2-19.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone colour consistencyGraded by eye under D65Colour matched to a retained master stone, per trayRepeat colour complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, which is how the Trade Show Sample account reads it at USD 2-19.

Cost Split on a Trade Show Sample Piece at USD 2-19

At USD 2-19 per piece for budget Earrings, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.

Cost lineShareWhat moves it
Base metal or alloy for budget Earrings32%Alloy choice and casting yield
Stone or melee for budget Earrings23%Sieve range and lot batching
Setting and finishing labor for budget Earrings21%Jig design and bench minutes
Plating, polish and QC for budget Earrings14%Per-tray versus per-piece checks
Packaging for budget Earrings10%display tray with sample card

The saving in the cheapest budget Earrings quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, quoted at USD 2-19 per piece in display tray with sample card.

MOQ, Mixed Designs and the Real First Order

Every year we see the same omission in budget Earrings spec sheets, and every year it costs a buyer a season, shipped as display tray with sample card and certified GRA report.

The commercial version of this question for budget Earrings is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, which is how the Trade Show Sample account reads it at USD 2-19.

That clause matters more than a discount on budget Earrings. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, priced at USD 2-19 for the 100-piece Trade Show Sample run.

Sample to Container: The Real Calendar

The number is less interesting than the rule behind it, and budget Earrings is where that rule gets tested, and 100 pieces leaves Wuzhou in display tray with sample card at USD 2-19.

What buyers underestimate on budget Earrings is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, with GRA report and display tray with sample card stated on the same sheet.

We plan a 3-5% buffer on first runs of budget Earrings and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, certified GRA report and packed display tray with sample card at 100 pieces.

Terms Behind a Trade Show Sample Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Trade Show Sample order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 2-19 for the 100-piece Trade Show Sample run.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 2-19 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the display tray with sample card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, the figure being USD 2-19 for a 100-piece run.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of plating thickness per batch for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and 100 pieces leaves Wuzhou in display tray with sample card at USD 2-19.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, on a 100-piece Trade Show Sample order at USD 2-19.

Three Failures That Reach the Trade Show Sample Bench

plating thickness drift

A 3 micron layer survives a season; a 1.5 micron layer does not. Thickness is measurable and should be stated per batch, on a 100-piece Trade Show Sample order at USD 2-19.

In a 100-piece run this typically shows on 14 of pieces. Catching it means measuring plating thickness per batch at the tray level, not inspecting the finished carton, the figure being USD 2-19 for a 100-piece run.

stone setting speed

Glue-set stones that pool adhesive above the seat photograph as a white dot. Recessed seats fix it at the bench, certified GRA report and packed display tray with sample card at 100 pieces.

The commercial effect is chargebacks and listing takedowns, typically USD 2-5 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as display tray with sample card and certified GRA report.

nickel release

EU and some US buyers require nickel-release compliance. A plating bath that passes on day one can fail after a barrel top-up, certified GRA report and packed display tray with sample card at 100 pieces.

Our countermeasure is a gauge and a written limit. It adds about 8 seconds per piece and removes the defect from the run rather than from the carton, which the Trade Show Sample file records at USD 2-19 in display tray with sample card.

The First Trade Show Sample Order

The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, on a 100-piece Trade Show Sample order at USD 2-19.

The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, with GRA report and display tray with sample card stated on the same sheet, which the Trade Show Sample file records at USD 2-19 in display tray with sample card.

The Calendar Behind a Trade Show Sample Run

For display tray with sample card at 100 pieces, the sequence is fixed and the dates are the only thing that moves, the figure being USD 2-19 for a 100-piece run.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

MOQ stays at 50 pieces per design on budget Earrings, low enough to test a shelf and high enough to keep the gauge check independent, the figure being USD 2-19 for a 100-piece run.

Getting display tray with sample card to the US market

Export runs through Guangzhou or Shenzhen. For Trade Show Sample orders the GRA report file travels with the shipping documents, not separately, which the Trade Show Sample file records at USD 2-19 in display tray with sample card.

The clearance term matters more than the rate at 100 pieces. A duty surprise can cost more than the whole freight line, which is how the Trade Show Sample account reads it at USD 2-19.

The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against plating thickness per batch and nickel release compliance, which is USD 2-19 on the Trade Show Sample schedule.

Frequently Asked Questions

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if nickel release shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and 100 pieces leaves Wuzhou in display tray with sample card at USD 2-19.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, priced at USD 2-19 for the 100-piece Trade Show Sample run.

What is the minimum order for budget Earrings?

50 pieces per budget Earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is how the Trade Show Sample account reads it at USD 2-19.

Do you supply certificates for budget Earrings?

GRA report on budget Earrings above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of plating thickness per batch, which is what a counter or a listing actually needs, which is how the Trade Show Sample account reads it at USD 2-19.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if nickel release shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and 100 pieces leaves Wuzhou in display tray with sample card at USD 2-19.

Next Step

If the USD 2-19 band fits your shelf, send the drawing and we will quote the 100-piece Trade Show Sample run inside one business day.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across budget Earrings and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, and at USD 2-19 for 100 pieces that is the number the buyer signs.

Related reading: Budget Earrings Q4 Holiday Stock: Sample to Container: The Real Calendar - HOLYCOME Bracelets & Bangles Bridal Boutique: The Reject Tray Policy That Decides a Partnershi - HOLYCOME

Request Wholesale Quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Related Articles