Bulk Mix Lots Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME
Bulk Mix Lots · November 9, 2026 · 10 views

Bulk Mix Lots Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME

Trade Show Sampling for bulk Mix Lots

A trade show converts on the sample that leaves the booth, not on the catalogue that gets left behind. The sample card has to carry the model number, the metal, the stone size, the FOB price and the MOQ, or the follow-up email starts from zero, which the Trade Show Sample file records at USD 2-19 in display tray with sample card.

Ten to twelve pieces on a tray is the useful number for bulk Mix Lots. More than that and the buyer photographs instead of touching, and a photograph is not an order, with GRA report and display tray with sample card stated on the same sheet.

Bulk Mix Lots wholesale piece from the HOLYCOME line in Wuzhou

The follow-up window is seven days. After that the card sits in a stack. We write the quote the same week and put the sample in the post so the buyer has the piece on the desk when the price arrives, which the Trade Show Sample file records at USD 2-19 in display tray with sample card.

MOQ, Mixed Designs and the Real First Order in the Trade Show Sample Program

A US buyer of bulk Mix Lots came to us after 100 bulk Mix Lots from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: nickel release had drifted far enough that the buyer's own bench could not correct it without recutting, with GRA report and display tray with sample card stated on the same sheet.

That rejection was avoidable at the drawing stage. Nickel release belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, with GRA report and display tray with sample card stated on the same sheet, the figure being USD 2-19 for a 100-piece run.

We kept the Trade Show Sample price and changed the four measurements that matter. The rebuild cost about 8 seconds per piece and removed the whole claim conversation, certified GRA report and packed display tray with sample card at 100 pieces.

Bulk Mix Lots setting and finish detail on a HOLYCOME factory sample

Four Spec Lines a Trade Show Sample Buyer Checks

The Trade Show Sample buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, which is how the Trade Show Sample account reads it at USD 2-19.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone colour consistencyGraded by eye under D65Colour matched to a retained master stone, per trayRepeat colour complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

None of the four adds cost at USD 2-19. They add about 8 seconds per piece and remove the reason to inspect twice.

Cost Split on a Trade Show Sample Piece at USD 2-19

At USD 2-19 per piece for bulk Mix Lots, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.

Cost lineShareWhat moves it
Base metal or alloy for bulk Mix Lots32%Alloy choice and casting yield
Stone or melee for bulk Mix Lots23%Sieve range and lot batching
Setting and finishing labor for bulk Mix Lots21%Jig design and bench minutes
Plating, polish and QC for bulk Mix Lots14%Per-tray versus per-piece checks
Packaging for bulk Mix Lots10%display tray with sample card

The saving in the cheapest quote hides in plating and stone grade. At 100 pieces that saving is visible in season two, quoted at USD 2-19 per piece in display tray with sample card.

MOQ, Mixed Designs and the Real First Order

On bulk Mix Lots, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, which the Trade Show Sample file records at USD 2-19 in display tray with sample card.

The commercial version of this question for bulk Mix Lots is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, certified GRA report and packed display tray with sample card at 100 pieces.

That clause matters more than a discount on bulk Mix Lots. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, shipped as display tray with sample card and certified GRA report.

Sample to Container: The Real Calendar

Buyers in the American bridal market tend to over-index on unit price for bulk Mix Lots and under-index on what happens after delivery, certified GRA report and packed display tray with sample card at 100 pieces.

What buyers underestimate on bulk Mix Lots is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, and 100 pieces leaves Wuzhou in display tray with sample card at USD 2-19.

We plan a 3-5% buffer on first runs of bulk Mix Lots and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, quoted at USD 2-19 per piece in display tray with sample card.

Terms Behind a Trade Show Sample Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Trade Show Sample order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with GRA report and display tray with sample card stated on the same sheet.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 2-19 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the display tray with sample card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, certified GRA report and packed display tray with sample card at 100 pieces.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of plating thickness per batch for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and the Trade Show Sample quote for it sits at USD 2-19.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 2-19 on the Trade Show Sample schedule.

Three Failures That Reach the Trade Show Sample Bench

plating thickness drift

A 3 micron layer survives a season; a 1.5 micron layer does not. Thickness is measurable and should be stated per batch, which is USD 2-19 on the Trade Show Sample schedule.

In a 100-piece run this typically shows on 11 of pieces. Catching it means measuring plating thickness per batch at the tray level, not inspecting the finished carton, the figure being USD 2-19 for a 100-piece run.

stone setting speed

Glue-set stones that pool adhesive above the seat photograph as a white dot. Recessed seats fix it at the bench, quoted at USD 2-19 per piece in display tray with sample card.

The commercial effect is chargebacks and listing takedowns, typically USD 2-5 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, the figure being USD 2-19 for a 100-piece run.

nickel release

EU and some US buyers require nickel-release compliance. A plating bath that passes on day one can fail after a barrel top-up, quoted at USD 2-19 per piece in display tray with sample card.

Our countermeasure is a gauge and a written limit. It adds about 8 seconds per piece and removes the defect from the run rather than from the carton, which is how the Trade Show Sample account reads it at USD 2-19.

The First Trade Show Sample Order

Start with three designs at 50 pieces each. That covers the 100 pieces you need to read sell-through without betting on one model, the figure being USD 2-19 for a 100-piece run.

Sample 3-5 days, bulk 15-20 days under 500 pieces, 100 pieces inside that window. The calendar is the same on every Trade Show Sample run, which the Trade Show Sample file records at USD 2-19 in display tray with sample card.

The Calendar Behind a Trade Show Sample Run

Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on bulk Mix Lots at USD 2-19.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, certified GRA report and packed display tray with sample card at 100 pieces, which is how the Trade Show Sample account reads it at USD 2-19.

Getting display tray with sample card to the American bridal market

Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in the American bridal market, the figure being USD 2-19 for a 100-piece run.

FOB is the default and DDP is the option. Buyers new to the American bridal market usually take DDP once and then switch after they see the breakdown, shipped as display tray with sample card and certified GRA report, on a 100-piece Trade Show Sample order at USD 2-19.

At receiving, count cartons, weigh one tray and measure ten pieces against plating thickness per batch. Twenty minutes here saves a season of returns, and at USD 2-19 for 100 pieces that is the number the buyer signs.

Frequently Asked Questions

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if nickel release shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and the Trade Show Sample quote for it sits at USD 2-19.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, with GRA report and display tray with sample card stated on the same sheet.

What is the minimum order for bulk Mix Lots?

50 pieces per bulk Mix Lot. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, with GRA report and display tray with sample card stated on the same sheet.

Do you supply certificates for bulk Mix Lots?

GRA report on bulk Mix Lots above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of plating thickness per batch, which is what a counter or a listing actually needs, quoted at USD 2-19 per piece in display tray with sample card.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if nickel release shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and the Trade Show Sample quote for it sits at USD 2-19.

Next Step

If the USD 2-19 band fits the shelf, send a drawing and we quote the 100-piece Trade Show Sample run inside one business day.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across bulk Mix Lots and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, which is how the Trade Show Sample account reads it at USD 2-19.

Related reading: Bulk Mix Lots Q4 Holiday Stock: Sample to Container: The Real Calendar - HOLYCOME Alloy Rings Bridal Boutique: The Reject Tray Policy That Decides a Partnership - HOLYCOME

Request Wholesale Quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Related Articles