Vermeil and Gold Plating Specs for bulk Mix Lots
Vermeil means a gold layer of at least 2.5 microns over sterling silver, and the US market reads that number as a material claim rather than a finish note. Below 2.5 microns the piece is gold-plated, not vermeil, and the word cannot be used, on a 100-piece Vermeil Upgrade order at USD 3-28.
We run 3 microns on bulk Mix Lots for accounts that publish the claim, with a palladium strike layer so wear-through reads white and not yellow. Thickness is logged per lot and appears on the GRA report batch sheet, shipped as retail box with care card and certified GRA report.
The cost difference is real: the USD 3-28 band moves up roughly sixty percent against rhodium-finished silver, and the retail price has to carry that or the margin disappears in the second season when the plating shows wear.
Why the Vermeil Upgrade Quote Looks Cheap Until It Lands
Two buyers ordered the same bulk Mix Lot in the same month. One paid 9% less and absorbed 23 rejects out of 100 pieces; the other paid our quote and shipped clean. The difference was nickel release, and it was measurable on both benches, priced at USD 3-28 for the 100-piece Vermeil Upgrade run.
In the Vermeil Upgrade file the failure was already written down. Nickel release sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, the figure being USD 3-28 for a 100-piece run.
The second run shipped retail box with care card with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, shipped as retail box with care card and certified GRA report.
What Fails First on bulk Mix Lots
nickel release
EU and some US buyers require nickel-release compliance. A plating bath that passes on day one can fail after a barrel top-up, certified GRA report and packed retail box with care card at 100 pieces.
Our countermeasure is a gauge and a written limit. It adds about 8 seconds per piece and removes the defect from the run rather than from the carton, which the Vermeil Upgrade file records at USD 3-28 in retail box with care card.
plating thickness drift
A 3 micron layer survives a season; a 1.5 micron layer does not. Thickness is measurable and should be stated per batch, on a 100-piece Vermeil Upgrade order at USD 3-28.
In a 100-piece run this typically shows on 8 of pieces. Catching it means measuring plating thickness per batch at the tray level, not inspecting the finished carton, shipped as retail box with care card and certified GRA report.
stone setting speed
Glue-set stones that pool adhesive above the seat photograph as a white dot. Recessed seats fix it at the bench, certified GRA report and packed retail box with care card at 100 pieces.
The commercial effect is chargebacks and listing takedowns, typically USD 2-5 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as retail box with care card and certified GRA report.
What a USD 3-28 Quote Hides
The 100-piece Vermeil Upgrade price splits as below. The line that decides season two is the plating and QC share, not the metal, the figure being USD 3-28 for a 100-piece run.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for bulk Mix Lots | 34% | Alloy choice and casting yield |
| Stone or melee for bulk Mix Lots | 25% | Sieve range and lot batching |
| Setting and finishing labor for bulk Mix Lots | 22% | Jig design and bench minutes |
| Plating, polish and QC for bulk Mix Lots | 15% | Per-tray versus per-piece checks |
| Packaging for bulk Mix Lots | 4% | retail box with care card |
Five lines, one price. If the supplier will not break them out, the number being compared is not a bulk Mix Lots price, quoted at USD 3-28 per piece in retail box with care card.
The Measurements Behind a USD 3-28 Quote
Specification is the only part of a bulk Mix Lots quote that survives the season. These four measurements are what we write into the retail box with care card paperwork, shipped as retail box with care card and certified GRA report.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
Every line above is measurable with a gauge and a scale. At USD 3-28 per piece, a supplier who cannot state them is selling a photo.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Vermeil Upgrade order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 3-28 for a 100-piece run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 3-28 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the retail box with care card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, the figure being USD 3-28 for a 100-piece run.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of plating thickness per batch for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and 100 pieces leaves Wuzhou in retail box with care card at USD 3-28.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, on a 100-piece Vermeil Upgrade order at USD 3-28.
How the Second Order Becomes Cheaper
Most bulk Mix Lots disputes we arbitrate trace back to this line, not to the defect itself, and 100 pieces leaves Wuzhou in retail box with care card at USD 3-28.
We run this check per tray rather than per carton because the defect that matters on bulk Mix Lots is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, and the Vermeil Upgrade quote for it sits at USD 3-28.
The report the buyer receives states the count per tray, the measured average and the outlier count for bulk Mix Lots. It is deliberately unglamorous, and it is the document that settles most disputes before they start, and at USD 3-28 for 100 pieces that is the number the buyer signs.
The Reject Tray Policy That Decides a Partnership
On bulk Mix Lots, the cheapest answer is rarely the cheapest outcome once the second season is counted, shipped as retail box with care card and certified GRA report.
The buyers who get the most out of bulk Mix Lots treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, and 100 pieces leaves Wuzhou in retail box with care card at USD 3-28.
We support it directly on bulk Mix Lots: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, the figure being USD 3-28 for a 100-piece run.
The Dock Check on bulk Mix Lots
We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, shipped as retail box with care card and certified GRA report, and 100 pieces leaves Wuzhou in retail box with care card at USD 3-28.
DDP suits a first Vermeil Upgrade order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, priced at USD 3-28 for the 100-piece Vermeil Upgrade run.
The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, which is USD 3-28 on the Vermeil Upgrade schedule.
From Spec to retail box with care card
Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, certified GRA report and packed retail box with care card at 100 pieces, the figure being USD 3-28 for a 100-piece run.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what plating thickness per batch and nickel release compliance looks like from this line, the figure being USD 3-28 for a 100-piece run.
A 100-Piece Test Run
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, on a 100-piece Vermeil Upgrade order at USD 3-28.
Put the reject rule in writing before the deposit. The Vermeil Upgrade conversation after arrival is shorter when the rule is on the order already, shipped as retail box with care card and certified GRA report.
Frequently Asked Questions
How long does a reorder of the same bulk Mix Lot take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is USD 3-28 on the Vermeil Upgrade schedule.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white bulk Mix Lots, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, shipped as retail box with care card and certified GRA report.
How is bulk Mix Lots packed for retail box with care card?
Every unit goes into a foam-backed pouch, then the retail box with care card, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and at USD 3-28 for 100 pieces that is the number the buyer signs.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Vermeil Upgrade quote for it sits at USD 3-28.
How long does a reorder of the same bulk Mix Lot take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is USD 3-28 on the Vermeil Upgrade schedule.
Next Step
Send a photo or a drawing of the piece you want in retail box with care card, and the reply carries a price, a calendar and the four measurements, on a 100-piece Vermeil Upgrade order at USD 3-28.
The factory behind bulk Mix Lots here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, which is USD 3-28 on the Vermeil Upgrade schedule.
Related reading: Bulk Mix Lots Amazon FBA Ready: The Sample Approval That Survives Production - HOLYCOME Bulk Mix Lots Made to Order: Carton Cube, Duty and the Freight Line That Surprises Bu - HOLYCOME