Fashion Necklaces Made to Order: Carton Cube, Duty and the Freight Line That Surprise - HOLYCOME
Fashion Necklaces · November 9, 2026 · 10 views

Fashion Necklaces Made to Order: Carton Cube, Duty and the Freight Line That Surprise - HOLYCOME

Carton Cube, Duty and the Freight Line That Surprises Buyers

Last May, a US buyer of fashion Necklaces placed 50 fashion Necklaces against a sample signed in September. The first container landed with 9 pieces that failed on clasp fatigue alone, and USD 20-70 landed on the buyer's P&L before a single unit sold, certified IGI report and packed single-piece foam box at 50 pieces.

Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and clasp fatigue is what a photograph fails to define, which the Made to Order file records at USD 32-225 in single-piece foam box.

Fashion Necklaces wholesale piece from the HOLYCOME line in Wuzhou

The fix cost about 16 seconds per fashion Necklace and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, quoted at USD 32-225 per piece in single-piece foam box.

The Made-to-Order Path for fashion Necklaces

Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, and at USD 32-225 for 50 pieces that is the number the buyer signs.

Twenty days is realistic for a new fashion Necklace when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, on a 50-piece Made to Order order at USD 32-225.

The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, on a 50-piece Made to Order order at USD 32-225.

Fashion Necklaces setting and finish detail on a HOLYCOME factory sample

The Three Failures We See Most in Incoming Samples

link stretch

Chain stretch starts at the link join where the wire was drawn thin to save metal. Measuring wire diameter at both ends of a run catches it before shipping, the figure being USD 32-225 for a 50-piece run.

Our countermeasure is a gauge and a written limit. It adds about 16 seconds per piece and removes the defect from the run rather than from the carton, priced at USD 32-225 for the 50-piece Made to Order run.

pendant bail shadow

A bail plated in a separate barrel than the chain shows a different white tone under store light. Plating a set in one barrel is the fix, and at USD 32-225 for 50 pieces that is the number the buyer signs.

In a 50-piece run this typically shows on 17 of pieces. Catching it means measuring clasp pull strength at the tray level, not inspecting the finished carton, on a 50-piece Made to Order order at USD 32-225.

clasp fatigue

A spring clasp rated by catalog rather than by pull test opens after 40-60 wear cycles. The rating belongs on the spec sheet, not on the website, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

The commercial effect is clasp replacement plus a goodwill credit, typically USD 7-12 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Made to Order account reads it at USD 32-225.

What US buyers Check Before They Sign

Four lines decide whether fashion Necklaces at USD 32-225 sells through or comes back, and none of them appears on a typical trading-company quote.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Put these four into the purchase order and the Made to Order argument after delivery becomes arithmetic, which the Made to Order file records at USD 32-225 in single-piece foam box.

Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with IGI report and single-piece foam box stated on the same sheet.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 32-225 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, shipped as single-piece foam box and certified IGI report.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of clasp pull strength for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, shipped as single-piece foam box and certified IGI report.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

Where USD 32-225 Per Piece Actually Goes

Cost per piece at USD 32-225 leaves little room for assumption. The table shows which line compresses and which one only moves quality.

Cost lineShareWhat moves it
Base metal or alloy for fashion Necklaces30%Alloy choice and casting yield
Stone or melee for fashion Necklaces20%Sieve range and lot batching
Setting and finishing labor for fashion Necklaces19%Jig design and bench minutes
Plating, polish and QC for fashion Necklaces12%Per-tray versus per-piece checks
Packaging for fashion Necklaces19%single-piece foam box

A factory with no bench minutes per piece has never costed fashion Necklaces at USD 32-225. Ask for minutes and for the reject rule.

What a Report Proves and What It Does Not

The answer for fashion Necklaces depends on four variables, and three of them are under the buyer's control, on a 50-piece Made to Order order at USD 32-225.

Three numbers decide it for fashion Necklaces: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, and at USD 32-225 for 50 pieces that is the number the buyer signs.

We send a one-page sheet with every fashion Necklaces quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, on a 50-piece Made to Order order at USD 32-225.

The Sample Approval That Survives Production

In the American bridal market, this is the single most negotiated line on fashion Necklaces and the least documented one, certified IGI report and packed single-piece foam box at 50 pieces.

There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on fashion Necklaces and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

We would rather lose a first order of fashion Necklaces on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, on a 50-piece Made to Order order at USD 32-225.

What This Means for a First Order

A first Made to Order order of 50 pieces per design at USD 32-225 is a test of the line, not a commitment to the range.

Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, which is how the Made to Order account reads it at USD 32-225.

Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, with IGI report and single-piece foam box stated on the same sheet, which is USD 32-225 on the Made to Order schedule.

For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, priced at USD 32-225 for the 50-piece Made to Order run.

Check the count, the weight and clasp pull strength and chain length within +/-3 mm before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, and the Made to Order quote for it sits at USD 32-225.

How a Repeat Order Gets Built

The sequence below is fixed for a Made to Order run. The dates move with the stone lot, not with the shipping season, with IGI report and single-piece foam box stated on the same sheet.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Made to Order shipment, on a 50-piece Made to Order order at USD 32-225.

Frequently Asked Questions

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, quoted at USD 32-225 per piece in single-piece foam box.

How long does a reorder of the same fashion Necklace take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and the Made to Order quote for it sits at USD 32-225.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white fashion Necklaces, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, shipped as single-piece foam box and certified IGI report.

How is fashion Necklaces packed for single-piece foam box?

Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and at USD 32-225 for 50 pieces that is the number the buyer signs.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, quoted at USD 32-225 per piece in single-piece foam box.

Next Step

The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Made to Order, which is USD 32-225 on the Made to Order schedule.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, certified IGI report and packed single-piece foam box at 50 pieces.

Related reading: Fashion Necklaces Private Label Carton: Alloy, Karat and the Cost of a Color Change - HOLYCOME Budget Earrings Q4 Holiday Stock: Sample to Container: The Real Calendar - HOLYCOME

Request Wholesale Quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Related Articles