Jewelry Sets Distributor Tier: What the Quote Actually Covers - HOLYCOME
Jewelry Sets · November 9, 2026 · 9 views

Jewelry Sets Distributor Tier: What the Quote Actually Covers - HOLYCOME

What the Quote Actually Covers

Last September, a US buyer of jewelry Sets placed 800 jewelry Sets against a sample signed in February. The first container landed with 9 pieces that failed on metal lot mismatch alone, and USD 40-130 landed on the buyer's P&L before a single unit sold, and the Distributor Tier quote for it sits at USD 61-399.

Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and metal lot mismatch is what a photograph fails to define, quoted at USD 61-399 per piece in bulk carton, 50 per bag.

Jewelry Sets wholesale piece from the HOLYCOME line in Wuzhou

The fix cost about 28 seconds per jewelry Set and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, quoted at USD 61-399 per piece in bulk carton, 50 per bag.

Where USD 61-399 Per Piece Actually Goes

Cost per piece at USD 61-399 leaves little room for assumption. The table shows which line compresses and which one only moves quality.

Cost lineShareWhat moves it
Base metal or alloy for jewelry Sets30%Alloy choice and casting yield
Stone or melee for jewelry Sets20%Sieve range and lot batching
Setting and finishing labor for jewelry Sets19%Jig design and bench minutes
Plating, polish and QC for jewelry Sets12%Per-tray versus per-piece checks
Packaging for jewelry Sets19%bulk carton, 50 per bag

A factory with no bench minutes per piece has never costed jewelry Sets at USD 61-399. Ask for minutes and for the reject rule.

What US buyers Check Before They Sign

Four lines decide whether jewelry Sets at USD 61-399 sells through or comes back, and none of them appears on a typical trading-company quote.

Jewelry Sets setting and finish detail on a HOLYCOME factory sample
Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Put these four into the purchase order and the Distributor Tier argument after delivery becomes arithmetic, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

Distributor Pricing Tiers on jewelry Sets

A distributor does not buy a jewelry Set, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, which is USD 61-399 on the Distributor Tier schedule.

What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, and at USD 61-399 for 800 pieces that is the number the buyer signs.

Turn is the number the distributor manages. At USD 61-399 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of jewelry Sets move in 800-piece lots rather than in the 50-piece sample quantity.

The Three Failures We See Most in Incoming Samples

metal lot mismatch

A set assembled from two casting lots shows a tonal step between the ring and the pendant under daylight. One lot per set is the rule, on a 800-piece Distributor Tier order at USD 61-399.

The commercial effect is piece replacement and a box reship, typically USD 18-30 per set. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 61-399.

stone count variance

A halo set quoting 42 stones that ships with 38 reads as a downgrade. Count per piece, not per order, the figure being USD 61-399 for a 800-piece run.

Our countermeasure is a gauge and a written limit. It adds about 28 seconds per piece and removes the defect from the run rather than from the carton, shipped as bulk carton, 50 per bag and certified SGS batch report.

box fit

A set that does not sit flat in its box photographs badly and arrives with a shifted piece. Box tolerance is part of the product, and the Distributor Tier quote for it sits at USD 61-399.

In a 800-piece run this typically shows on 14 of pieces. Catching it means measuring cross-piece color match at the tray level, not inspecting the finished carton, and the Distributor Tier quote for it sits at USD 61-399.

Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, quoted at USD 61-399 per piece in bulk carton, 50 per bag.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 61-399 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 61-399.

Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of cross-piece color match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is USD 61-399 on the Distributor Tier schedule.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is how the Distributor Tier account reads it at USD 61-399.

Sample to Container: The Real Calendar

This is the question that separates a trading company from a factory, and on jewelry Sets the answer is usually shorter than buyers expect, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 61-399.

One practical note on timing for jewelry Sets: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, which is how the Distributor Tier account reads it at USD 61-399.

We date the jewelry Sets proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, the figure being USD 61-399 for a 800-piece run.

AQL, Tray Checks and What a QC Report Should Say

Buyers ask it in the first call about jewelry Sets and rarely get a number they can put in a spreadsheet, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

In North American retail terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For jewelry Sets, we publish the figure per SKU and hold it for the order window rather than for the calendar year, on a 800-piece Distributor Tier order at USD 61-399.

Practically, it shows up in three places for jewelry Sets: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, and at USD 61-399 for 800 pieces that is the number the buyer signs.

How a Repeat Order Gets Built

The sequence below is fixed for a Distributor Tier run. The dates move with the stone lot, not with the shipping season, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 61-399.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Distributor Tier shipment, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 61-399.

Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, priced at USD 61-399 for the 800-piece Distributor Tier run.

For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, and the Distributor Tier quote for it sits at USD 61-399.

Check the count, the weight and cross-piece color match and stone count per piece before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 61-399.

What This Means for a First Order

A first Distributor Tier order of 50 pieces per design at USD 61-399 is a test of the line, not a commitment to the range.

Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, which the Distributor Tier file records at USD 61-399 in bulk carton, 50 per bag.

Frequently Asked Questions

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white jewelry Sets, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Distributor Tier file records at USD 61-399 in bulk carton, 50 per bag.

How is jewelry Sets packed for bulk carton, 50 per bag?

Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and the Distributor Tier quote for it sits at USD 61-399.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

How long does a reorder of the same jewelry Set take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 61-399.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white jewelry Sets, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Distributor Tier file records at USD 61-399 in bulk carton, 50 per bag.

Next Step

The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Distributor Tier, which the Distributor Tier file records at USD 61-399 in bulk carton, 50 per bag.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, the figure being USD 61-399 for a 800-piece run.

Related reading: Jewelry Sets Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME Brooches & Pins Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME

Request Wholesale Quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Related Articles