Vermeil and Gold Plating Specs for jewelry Sets
Vermeil means a gold layer of at least 2.5 microns over sterling silver, and the US market reads that number as a material claim rather than a finish note. Below 2.5 microns the piece is gold-plated, not vermeil, and the word cannot be used, and the Vermeil Upgrade quote for it sits at USD 104-672.
We run 3 microns on jewelry Sets for accounts that publish the claim, with a palladium strike layer so wear-through reads white and not yellow. Thickness is logged per lot and appears on the GRA report batch sheet, quoted at USD 104-672 per piece in retail box with care card.
The cost difference is real: the USD 104-672 band moves up roughly sixty percent against rhodium-finished silver, and the retail price has to carry that or the margin disappears in the second season when the plating shows wear.
What a Report Proves and What It Does Not
Last September, a US buyer of jewelry Sets placed 100 jewelry Sets against a sample signed in February. The first container landed with 9 pieces that failed on metal lot mismatch alone, and USD 45-180 landed on the buyer's P&L before a single unit sold, shipped as retail box with care card and certified GRA report.
Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and metal lot mismatch is what a photograph fails to define, which is how the Vermeil Upgrade account reads it at USD 104-672.
The fix cost about 28 seconds per jewelry Set and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, which the Vermeil Upgrade file records at USD 104-672 in retail box with care card.
The Three Failures We See Most in Incoming Samples
metal lot mismatch
A set assembled from two casting lots shows a tonal step between the ring and the pendant under daylight. One lot per set is the rule, and at USD 104-672 for 100 pieces that is the number the buyer signs.
In a 100-piece run this typically shows on 14 of pieces. Catching it means measuring cross-piece color match at the tray level, not inspecting the finished carton, quoted at USD 104-672 per piece in retail box with care card.
stone count variance
A halo set quoting 42 stones that ships with 38 reads as a downgrade. Count per piece, not per order, quoted at USD 104-672 per piece in retail box with care card.
The commercial effect is piece replacement and a box reship, typically USD 18-30 per set. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, priced at USD 104-672 for the 100-piece Vermeil Upgrade run.
box fit
A set that does not sit flat in its box photographs badly and arrives with a shifted piece. Box tolerance is part of the product, with GRA report and retail box with care card stated on the same sheet.
Our countermeasure is a gauge and a written limit. It adds about 28 seconds per piece and removes the defect from the run rather than from the carton, certified GRA report and packed retail box with care card at 100 pieces.
Where USD 104-672 Per Piece Actually Goes
Cost per piece at USD 104-672 leaves little room for assumption. The table shows which line compresses and which one only moves quality.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for jewelry Sets | 30% | Alloy choice and casting yield |
| Stone or melee for jewelry Sets | 20% | Sieve range and lot batching |
| Setting and finishing labor for jewelry Sets | 19% | Jig design and bench minutes |
| Plating, polish and QC for jewelry Sets | 12% | Per-tray versus per-piece checks |
| Packaging for jewelry Sets | 19% | retail box with care card |
A factory with no bench minutes per piece has never costed jewelry Sets at USD 104-672. Ask for minutes and for the reject rule.
What US buyers Check Before They Sign
Four lines decide whether jewelry Sets at USD 104-672 sells through or comes back, and none of them appears on a typical trading-company quote.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
Put these four into the purchase order and the Vermeil Upgrade argument after delivery becomes arithmetic, with GRA report and retail box with care card stated on the same sheet.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Vermeil Upgrade order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is USD 104-672 on the Vermeil Upgrade schedule.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 104-672 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the retail box with care card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is USD 104-672 on the Vermeil Upgrade schedule.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of cross-piece color match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, the figure being USD 104-672 for a 100-piece run.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and the Vermeil Upgrade quote for it sits at USD 104-672.
How the Second Order Becomes Cheaper
Ask three suppliers of jewelry Sets this question and you will get three answers. Only one of them survives an inspection, quoted at USD 104-672 per piece in retail box with care card.
We run this check per tray rather than per carton because the defect that matters on jewelry Sets is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, and the Vermeil Upgrade quote for it sits at USD 104-672.
The report the buyer receives states the count per tray, the measured average and the outlier count for jewelry Sets. It is deliberately unglamorous, and it is the document that settles most disputes before they start, which the Vermeil Upgrade file records at USD 104-672 in retail box with care card.
The Reject Tray Policy That Decides a Partnership
On jewelry Sets, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, shipped as retail box with care card and certified GRA report.
The buyers who get the most out of jewelry Sets treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, with GRA report and retail box with care card stated on the same sheet.
We support it directly on jewelry Sets: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, the figure being USD 104-672 for a 100-piece run.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, on a 100-piece Vermeil Upgrade order at USD 104-672.
For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, with GRA report and retail box with care card stated on the same sheet, with GRA report and retail box with care card stated on the same sheet.
Check the count, the weight and cross-piece color match and stone count per piece before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, priced at USD 104-672 for the 100-piece Vermeil Upgrade run.
How a Repeat Order Gets Built
The sequence below is fixed for a Vermeil Upgrade run. The dates move with the stone lot, not with the shipping season, the figure being USD 104-672 for a 100-piece run.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Vermeil Upgrade shipment, on a 100-piece Vermeil Upgrade order at USD 104-672.
What This Means for a First Order
A first Vermeil Upgrade order of 50 pieces per design at USD 104-672 is a test of the line, not a commitment to the range.
Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, and 100 pieces leaves Wuzhou in retail box with care card at USD 104-672.
Frequently Asked Questions
How long does a reorder of the same jewelry Set take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, priced at USD 104-672 for the 100-piece Vermeil Upgrade run.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white jewelry Sets, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and 100 pieces leaves Wuzhou in retail box with care card at USD 104-672.
How is jewelry Sets packed for retail box with care card?
Every unit goes into a foam-backed pouch, then the retail box with care card, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, with GRA report and retail box with care card stated on the same sheet.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which the Vermeil Upgrade file records at USD 104-672 in retail box with care card.
How long does a reorder of the same jewelry Set take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, priced at USD 104-672 for the 100-piece Vermeil Upgrade run.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Vermeil Upgrade, which is how the Vermeil Upgrade account reads it at USD 104-672.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, quoted at USD 104-672 per piece in retail box with care card.
Related reading: Jewelry Sets Amazon FBA Ready: The Sample Approval That Survives Production - HOLYCOME Jewelry Sets Made to Order: Carton Cube, Duty and the Freight Line That Surprises Buy - HOLYCOME