Why the unit price on the quote is not your cost
I have sat in maybe four hundred buyer calls over the years, and the same thing happens almost every time. Somebody gets a quote of 4.20 USD per piece for a silver pendant, multiplies it by 500, and builds a margin plan on that number. Then the first shipment arrives and the real cost is closer to 5.80. Nobody lied to them. They just priced the factory door, not the door of their own warehouse.
This article is the math I walk buyers through before we cut a single PO. If you are placing a first order in 925 sterling silver wholesale, run your numbers this way and you will know whether the program works before the deposit leaves your account.
The five cost blocks in a silver piece
Every cast or stamped silver item we ship breaks into five blocks. Understanding which block is heavy tells you where to negotiate and where there is simply nothing to give.
1. Metal
Silver is priced per troy ounce and moves daily. A 3.5 gram ring at spot plus a small fabricator premium is your floor. On a first order, ask whether the quote is locked to a spot date or floats on shipment day. Floating quotes on a rising market are how buyers get surprised two weeks later.
2. Labor and tooling
Stock designs carry almost no labor load because the mold already exists. Custom CAD work adds a one-time tooling charge, usually 30 to 120 USD per design depending on complexity, and that charge does not disappear if you reorder, it just amortizes across future runs.
3. Stones
Moissanite and lab-grown stones are graded and priced per carat by size and color band. A 1mm accent melee and a 6.5mm center are not the same conversation. Stone cost is also where a cheap quote hides its shortcut, usually lower clarity goods that pass at arm's length and fail under a loupe.
4. Plating and finish
Rhodium over white, 18k gold vermeil, or e-coat for anti-tarnish. Each adds per-piece cost and each has a thickness spec. Ask for the micron number in writing, because "gold plated" with no number is a marketing phrase, not a specification.
5. Compliance and packaging
Hallmark stamping, GRA cards for moissanite, IGI paperwork where the stone warrants it, pouches, boxes, and insert cards. Small per unit, but they add up across 500 pieces.
Landed cost walkthrough: a 500-piece first order
Here is a realistic build for a mixed first order: 500 pieces of 925 sterling silver wholesale, average 3.2 grams finished weight, moissanite accents, rhodium finish, GRA card per piece, poly bag plus pouch. Numbers are illustrative, not a quote.
| Line | Basis | Amount (USD) |
|---|---|---|
| Silver metal | 1,600 g at spot plus premium | 1,450 |
| Labor, casting, setting | 500 pcs average | 1,300 |
| Moissanite accents | Mixed melee and centers | 1,150 |
| Rhodium plating | 0.10 micron spec | 260 |
| GRA cards, pouches, packing | 500 sets | 310 |
| Factory subtotal | 4,470 | |
| Freight DDP to US | 5 to 8 days door | 390 |
| Duty and import clearance | Included under DDP | 0 |
| Payment fees | 30 percent T/T deposit, balance T/T | 95 |
| Inspection or third-party QC | Optional pre-ship AQL | 180 |
| Landed total | 5,135 | |
| Landed per piece | 10.27 |
Notice the gap between 8.94 factory average and 10.27 landed. That 15 percent is the part first-time buyers forget, and it is the part that eats margin.
The fees that never appear on the factory quote
- Wire transfer fees on both ends, typically 25 to 45 USD per transfer, doubled because there are two payments.
- Currency conversion spread if you pay in USD from a non-USD account.
- Customs broker fees, even when duty is zero under a preference program.
- Inland trucking from port to your 3PL, if you did not buy door delivery.
- Rework or replacement cost when an AQL sample fails and part of the run has to be redone.
- Carry cost on inventory that sits longer than your forecast.
None of these are tricks. They are just outside the factory's four walls, and a factory quote will never include them.
Where a factory beats a trading company by about 20 percent
We run our own casting floor, stone setting benches and plating line under one roof, so there is no middle layer marking up metal and labor before the price reaches you. That is the whole reason our cost, speed and yield typically land around 20 percent better than a typical trading company on the same spec. When a stone fails incoming check, it does not become a customer problem, it becomes our scrap line, because we bought it.
Concretely: our incoming check inspects stone parcels before they touch a bench, in-process checks run at casting, setting and polish stations, and pre-ship goes out under AQL sampling with photos logged against your PO. Twelve to eighteen days production on a first run is normal, and stock items ship from one piece. Custom work starts at 30 pieces per design.
Payment, certificates and delivery terms
Standard terms on a first order are 30 percent T/T deposit with the balance against pre-ship photos, and PayPal is fine for samples so you are not wiring money to an unproven supplier. Every moissanite piece ships with a GRA card, and IGI reports are available where the stone size justifies the cost.
Delivery is DDP, five to eight days door to door, which means duty and clearance sit on our side of the invoice. If you would rather use your own forwarder on FOB terms, that works too, just budget the broker and trucking lines yourself.
If you cannot explain your landed cost per piece to a business partner in three sentences, you are not ready to place the order. Do the math first, then negotiate.
Frequently Asked Questions
What is the minimum order for 925 sterling silver wholesale?
Stock designs start at one piece, so you can sample before committing. Custom designs carry a 30 piece minimum per style, and tooling is quoted separately based on the model.
How long does a first order take from deposit to delivery?
Production runs twelve to eighteen days after artwork and deposit confirmation, then five to eight days DDP transit. Samples from stock usually leave within two to three days.
How is price calculated on a silver piece?
Price is built from metal weight at the agreed spot date, labor, stone grade and size, plating thickness, and packaging. Ask for each line separately so you can compare quotes apples to apples instead of chasing the lowest total.
If you want this math run on your own design list, send the styles, target quantities and destination zip to service@holycome.com or message WhatsApp +86 133 7744 7107, and we will return a line-by-line landed cost sheet plus a sample plan before you commit to a deposit.