Why the Unit Price You Get Quoted Is Not Your Cost
Most first-time buyers open a quote sheet, look at the FOB number, multiply by quantity, and think that is the order. Twelve years on the QC bench says otherwise. The gap between that number and what actually leaves your bank account is usually 18 to 30 percent, and it is where first orders go sideways.
I am not going to sell you on alloy rings here. I am going to walk you through the arithmetic I do with buyers before we cut a single PO, so you can decide whether the program works at retail before you wire anything.
The Six Line Items That Make Up Landed Cost
Every alloy ring order carries the same six buckets. Miss one and your margin math is fiction. Write them down in this order and fill them in as quotes come in.
- Ex-works unit price times quantity, plus any plating upgrade or stone-setting surcharge
- Custom tooling or mold amortization, if the design is not in our existing stock range
- Export packing, cartons, and any branded pouch or box you require
- Freight, insurance, and the DDP or DDU choice you make at booking
- Duty, VAT, or import processing fee at destination
- Payment fees: T/T wire charges and the spread on currency conversion
There is a seventh item nobody quotes: the cost of a bad batch. We will get to that, because it is the one that hurts most on a first order.
A Worked Example on a 300-Piece First Order
Say you are testing the water with 300 alloy rings, mixed sizes, two finishes, one stone-set style. That is a realistic starter quantity for a boutique or a small Amazon seller. Here is how the numbers stack up at our floor.
| Cost line | Basis | Approx. amount (USD) | Notes |
|---|---|---|---|
| Goods, ex-works | 300 pcs at 1.85 avg | 555 | Mixed SKUs, stock molds |
| Custom mold amortization | One new design | 90 | Spread over first run only |
| Packing | Pouch plus carton | 45 | Plain pouch, no logo |
| Freight, DDP | Door delivery, 5-8 days | 120 | Air express, insured |
| Duty and import fees | Included in DDP | 0 | Seller clears customs |
| Payment fees | T/T 30% deposit, balance before ship | 28 | Wire plus FX spread |
| Total landed | 838 over 300 pcs | 2.79 per ring | Versus 1.85 ex-works |
That is a 51 percent uplift from ex-works to landed. On a 300-piece run the fixed costs dominate; at 3,000 pieces the same order lands closer to 2.30 per ring because freight and tooling spread thin. This is the single most useful thing to understand about first orders: small runs are expensive per unit, and that is normal, not a sign you are being overcharged.
Where the Money Actually Goes Wrong
Tooling charged twice
Some suppliers quote a mold fee and then quietly re-quote it on the second order. Ask in writing whether the mold is amortized once or charged per run, and who owns it if you leave. At our plant, stock designs carry no tooling at all, and custom molds are billed once with the drawing and cavity count stated on the invoice.
Freight quoted as FOB but sold as landed
DDP sounds clean until you read the fine print on who pays the destination handling fee. We ship DDP with the duty already inside the price, door to door in 5 to 8 days, so the number on the invoice is the number you budgeted. If a supplier cannot tell you the DDP all-in figure before you pay, that is a warning sign.
Payment structure that traps cash
Standard terms here are 30 percent T/T deposit with the balance against the pre-shipment inspection report. For samples, PayPal is fine and fast. Do not accept a supplier asking for full payment upfront on a first order; there is no reason for it when production is 12 to 18 days.
The Hidden Line Item: Rework and Returns
A batch of 300 rings with a 4 percent plating defect rate costs you 12 replacements, plus return freight, plus the review. On a 2.79 landed cost that is roughly 35 dollars of pure loss and a hit to your listing rating. Multiply that across a season and it dwarfs the savings from chasing the cheapest quote.
This is where the QC process is worth paying for. Our line runs three checks: incoming stone and material inspection before anything is set, in-process checks at the setting and polishing stations, and a pre-ship AQL sample pull against the agreed standard. Every stone-set piece ships with GRA documentation, and lab-grown diamond goods carry IGI certificates. Buyers who skip the pre-ship AQL step are the ones who discover problems at their own warehouse.
On a first order, the cheapest quote and the lowest landed cost are rarely the same supplier. One is a price, the other is an outcome.
Why Our Numbers Run About 20 Percent Better
We are the factory, not a trading desk. The stone cutting, silver casting, and setting happen under one roof, so there is no intermediary margin layered into the quote and no second QC pass to pay for. That is where the roughly 20 percent advantage in cost, speed, and yield comes from, and it is the reason a 12 to 18 day production window is realistic rather than optimistic.
It also means MOQs are honest. Stock alloy rings ship from one piece. Custom designs start at 30 pieces per style, because that is the point where the mold and setup cost stops hurting the unit price.
How to Build the First Order So It Survives
- Start with stock designs to learn the freight and duty reality before spending on tooling
- Keep the first run to two or three finishes so plating defects are easy to isolate
- Budget landed cost, not ex-works, when you set retail price
- Request the pre-ship AQL report and photos before releasing the balance
- Order one custom style at 30 pieces to test demand before scaling molds
Run the arithmetic on your own quantities before you commit. If the landed number does not leave room at your retail price, the design is wrong for your market, not the factory.
Frequently Asked Questions
What is the minimum order for alloy rings wholesale?
Stock designs ship from one piece, so you can sample without a volume commitment. Custom styles start at 30 pieces per design, which is where mold and setup costs stop distorting the unit price.
How long does a first order take, and what is the price basis?
Production runs 12 to 18 days after deposit and artwork approval, then 5 to 8 days DDP to your door. Prices are quoted ex-works per piece, with freight and duty shown separately or bundled into a DDP figure.
What payment terms and certificates should I expect?
Standard terms are 30 percent T/T deposit with the balance before shipment; PayPal works for samples. Stone-set goods ship with GRA reports and lab-grown diamond pieces with IGI certificates, plus a pre-ship AQL inspection report.
Send us your SKU list, target quantities, and destination zip code, and we will return a landed cost sheet with freight and duty already inside it. Samples can go out the same week. WhatsApp +86 133 7744 7107 or email service@holycome.com.