Alloy, Karat and the Cost of a Color Change
The brief was simple: 200 bracelets and Bangles, 14K gold, delivered before April. The run that arrived carried 17 pieces with clasp torsion failure, and the buyer spent USD 25-85 on sorting before the goods reached a shelf, certified GRA report and packed private-label carton with hangtag at 200 pieces.
Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and clasp torsion failure is what a photograph fails to define, with GRA report and private-label carton with hangtag stated on the same sheet, the figure being USD 40-264 for a 200-piece run.
The fix cost about 20 seconds per bracelets and Bangle and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, priced at USD 40-264 for the 200-piece Private Label Carton run.
What US buyers Check Before They Sign
Four lines decide whether bracelets and Bangles at USD 40-264 sells through or comes back, and none of them appears on a typical trading-company quote.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Put these four into the purchase order and the Private Label Carton argument after delivery becomes arithmetic, which is how the Private Label Carton account reads it at USD 40-264.
Private Label Packaging for bracelets and Bangles
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, quoted at USD 40-264 per piece in private-label carton with hangtag.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin bracelets and Bangle. Below 0.8 mm of shank width we recommend the hangtag only, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 40-264.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, shipped as private-label carton with hangtag and certified GRA report.
Where USD 40-264 Per Piece Actually Goes
Cost per piece at USD 40-264 leaves little room for assumption. The table shows which line compresses and which one only moves quality.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for bracelets and Bangles | 30% | Alloy choice and casting yield |
| Stone or melee for bracelets and Bangles | 20% | Sieve range and lot batching |
| Setting and finishing labor for bracelets and Bangles | 19% | Jig design and bench minutes |
| Plating, polish and QC for bracelets and Bangles | 12% | Per-tray versus per-piece checks |
| Packaging for bracelets and Bangles | 19% | private-label carton with hangtag |
A factory with no bench minutes per piece has never costed bracelets and Bangles at USD 40-264. Ask for minutes and for the reject rule.
The Three Failures We See Most in Incoming Samples
length drift on bangles
A bangle that measures 6.9 inch instead of 7.0 slides differently on the wrist. Oval versus round form changes the fit even at the same number, on a 200-piece Private Label Carton order at USD 40-264.
In a 200-piece run this typically shows on 11 of pieces. Catching it means measuring clasp torsion resistance at the tray level, not inspecting the finished carton, with GRA report and private-label carton with hangtag stated on the same sheet.
clasp torsion failure
A box clasp rated for a necklace fails under wrist rotation. The clasp has to be tested in torsion, not only in pull, the figure being USD 40-264 for a 200-piece run.
The commercial effect is clasp replacement plus reship, typically USD 9-15 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and at USD 40-264 for 200 pieces that is the number the buyer signs.
link gap growth
Gaps between links grow when the connecting pin is 0.05 mm under size. A pin gauge on every tenth piece catches it cheaply, which is how the Private Label Carton account reads it at USD 40-264.
Our countermeasure is a gauge and a written limit. It adds about 20 seconds per piece and removes the defect from the run rather than from the carton, which the Private Label Carton file records at USD 40-264 in private-label carton with hangtag.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 40-264 for the 200-piece Private Label Carton run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 40-264 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, quoted at USD 40-264 per piece in private-label carton with hangtag.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of clasp torsion resistance for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is USD 40-264 on the Private Label Carton schedule.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 40-264 on the Private Label Carton schedule.
The Sample Approval That Survives Production
The number is less interesting than the rule behind it, and bracelets and Bangles is where that rule gets tested, on a 200-piece Private Label Carton order at USD 40-264.
The commercial version of this question for bracelets and Bangles is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, quoted at USD 40-264 per piece in private-label carton with hangtag.
That clause matters more than a discount on bracelets and Bangles. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, shipped as private-label carton with hangtag and certified GRA report.
How the Second Order Becomes Cheaper
Ask three suppliers of bracelets and Bangles this question and you will get three answers. Only one of them survives an inspection, which is USD 40-264 on the Private Label Carton schedule.
We run this check per tray rather than per carton because the defect that matters on bracelets and Bangles is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, and at USD 40-264 for 200 pieces that is the number the buyer signs.
The report the buyer receives states the count per tray, the measured average and the outlier count for bracelets and Bangles. It is deliberately unglamorous, and it is the document that settles most disputes before they start, which the Private Label Carton file records at USD 40-264 in private-label carton with hangtag.
How a Repeat Order Gets Built
The sequence below is fixed for a Private Label Carton run. The dates move with the stone lot, not with the shipping season, which the Private Label Carton file records at USD 40-264 in private-label carton with hangtag.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Private Label Carton shipment, which is how the Private Label Carton account reads it at USD 40-264.
What This Means for a First Order
A first Private Label Carton order of 50 pieces per design at USD 40-264 is a test of the line, not a commitment to the range.
Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, on a 200-piece Private Label Carton order at USD 40-264.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, the figure being USD 40-264 for a 200-piece run.
For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, shipped as private-label carton with hangtag and certified GRA report, quoted at USD 40-264 per piece in private-label carton with hangtag.
Check the count, the weight and clasp torsion resistance and overall length within +/-3 mm before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, and at USD 40-264 for 200 pieces that is the number the buyer signs.
Frequently Asked Questions
What is the minimum order for bracelets and Bangles?
50 pieces per bracelets and Bangle. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is how the Private Label Carton account reads it at USD 40-264.
Do you supply certificates for bracelets and Bangles?
GRA report on bracelets and Bangles above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of clasp torsion resistance, which is what a counter or a listing actually needs, and the Private Label Carton quote for it sits at USD 40-264.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if clasp torsion failure shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and at USD 40-264 for 200 pieces that is the number the buyer signs.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, with GRA report and private-label carton with hangtag stated on the same sheet.
What is the minimum order for bracelets and Bangles?
50 pieces per bracelets and Bangle. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is how the Private Label Carton account reads it at USD 40-264.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Private Label Carton, priced at USD 40-264 for the 200-piece Private Label Carton run.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, and the Private Label Carton quote for it sits at USD 40-264.
Related reading: Jewelry Sets Vermeil Upgrade: What a Report Proves and What It Does Not - HOLYCOME Jewelry Sets Valentine Program: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME