What the Quote Actually Covers in the Distributor Tier Program
A US buyer of brooches and Pins came to us after 800 brooches and Pins from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: catch strength had drifted far enough that the buyer's own bench could not correct it without recutting, quoted at USD 11-90 per piece in bulk carton, 50 per bag.
At 800 pieces the buyer was not buying a defect, they were buying a document. The Distributor Tier order carried a photo and a price, and catch strength had nowhere to live, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, which is how the Distributor Tier account reads it at USD 11-90.
Cost Split on a Distributor Tier Piece at USD 11-90
At USD 11-90 per piece for brooches and Pins, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for brooches and Pins | 32% | Alloy choice and casting yield |
| Stone or melee for brooches and Pins | 23% | Sieve range and lot batching |
| Setting and finishing labor for brooches and Pins | 21% | Jig design and bench minutes |
| Plating, polish and QC for brooches and Pins | 14% | Per-tray versus per-piece checks |
| Packaging for brooches and Pins | 10% | bulk carton, 50 per bag |
The saving in the cheapest brooches and Pins quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, the figure being USD 11-90 for a 800-piece run.
Four Spec Lines a Distributor Tier Buyer Checks
Most quotes describe the brooches and Pin and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, which the Distributor Tier file records at USD 11-90 in bulk carton, 50 per bag.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, quoted at USD 11-90 per piece in bulk carton, 50 per bag.
Distributor Pricing Tiers on brooches and Pins
A distributor does not buy a brooches and Pin, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, on a 800-piece Distributor Tier order at USD 11-90.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Turn is the number the distributor manages. At USD 11-90 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of brooches and Pins move in 800-piece lots rather than in the 50-piece sample quantity.
Three Failures That Reach the Distributor Tier Bench
catch strength
A safety catch that opens under fabric tension loses the piece. Catch tension needs a pull check, not a visual one, priced at USD 11-90 for the 800-piece Distributor Tier run.
Our countermeasure is a gauge and a written limit. It adds about 15 seconds per piece and removes the defect from the run rather than from the carton, and the Distributor Tier quote for it sits at USD 11-90.
pin solder creep
A pin joined with soft solder creeps under load and tilts. Hard solder plus a mechanical seat holds it, quoted at USD 11-90 per piece in bulk carton, 50 per bag.
In a 800-piece run this typically shows on 14 of pieces. Catching it means measuring catch pull strength at the tray level, not inspecting the finished carton, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
enamel pinholes
Enamel fired with trapped air shows pinholes after polish. Two thin coats beat one thick coat, shipped as bulk carton, 50 per bag and certified SGS batch report.
The commercial effect is piece loss and replacement, typically USD 6-11 per brooch. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and the Distributor Tier quote for it sits at USD 11-90.
Terms Behind a Distributor Tier Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 11-90.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 11-90 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of catch pull strength for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Distributor Tier account reads it at USD 11-90.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, priced at USD 11-90 for the 800-piece Distributor Tier run.
Sample to Container: The Real Calendar
Buyers ask it in the first call about brooches and Pins and rarely get a number they can put in a spreadsheet, quoted at USD 11-90 per piece in bulk carton, 50 per bag.
One practical note on timing for brooches and Pins: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, quoted at USD 11-90 per piece in bulk carton, 50 per bag.
We date the brooches and Pins proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 11-90.
AQL, Tray Checks and What a QC Report Should Say
The answer for brooches and Pins depends on four variables, and three of them are under the buyer's control, priced at USD 11-90 for the 800-piece Distributor Tier run.
In US wholesale terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For brooches and Pins, we publish the figure per SKU and hold it for the order window rather than for the calendar year, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Practically, it shows up in three places for brooches and Pins: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, quoted at USD 11-90 per piece in bulk carton, 50 per bag.
The Calendar Behind a Distributor Tier Run
For bulk carton, 50 per bag at 800 pieces, the sequence is fixed and the dates are the only thing that moves, and the Distributor Tier quote for it sits at USD 11-90.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
MOQ stays at 50 pieces per design on brooches and Pins, low enough to test a shelf and high enough to keep the gauge check independent, and at USD 11-90 for 800 pieces that is the number the buyer signs.
Getting bulk carton, 50 per bag to US wholesale
Export runs through Guangzhou or Shenzhen. For Distributor Tier orders the SGS batch report file travels with the shipping documents, not separately, priced at USD 11-90 for the 800-piece Distributor Tier run.
The clearance term matters more than the rate at 800 pieces. A duty surprise can cost more than the whole freight line, and the Distributor Tier quote for it sits at USD 11-90.
The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against catch pull strength and pin alignment, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, which is USD 11-90 on the Distributor Tier schedule.
The First Distributor Tier Order
The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, priced at USD 11-90 for the 800-piece Distributor Tier run.
The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, and the Distributor Tier quote for it sits at USD 11-90.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white brooches and Pins, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Distributor Tier file records at USD 11-90 in bulk carton, 50 per bag.
How is brooches and Pins packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, on a 800-piece Distributor Tier order at USD 11-90.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is how the Distributor Tier account reads it at USD 11-90.
How long does a reorder of the same brooches and Pin take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white brooches and Pins, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Distributor Tier file records at USD 11-90 in bulk carton, 50 per bag.
Next Step
If the USD 11-90 band fits your shelf, send the drawing and we will quote the 800-piece Distributor Tier run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across brooches and Pins and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, priced at USD 11-90 for the 800-piece Distributor Tier run.
Related reading: Brooches & Pins Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME Hair Accessories Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME