Brooches & Pins Valentine Program: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME
Brooches & Pins · November 9, 2026 · 8 views

Brooches & Pins Valentine Program: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME

AQL, Tray Checks and What a QC Report Should Say in the Valentine Program Program

A US buyer of brooches and Pins sent us a competitor's brooches and Pin in July with one question: why does this fail at catch strength after a season. We measured it, rebuilt the spec around catch pull strength and pin alignment, and shipped 300 brooches and Pins that cleared inspection with zero rejects, which the Valentine Program file records at USD 13-106 in heart gift box.

That rejection was avoidable at the drawing stage. Catch strength belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, which the Valentine Program file records at USD 13-106 in heart gift box.

Brooches & Pins wholesale piece from the HOLYCOME line in Wuzhou

We kept the Valentine Program price and changed the four measurements that matter. The rebuild cost about 15 seconds per piece and removed the whole claim conversation, shipped as heart gift box and certified IGI report.

Four Spec Lines a Valentine Program Buyer Checks

The Valentine Program buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, and 300 pieces leaves Wuzhou in heart gift box at USD 13-106.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit
Plating thicknessNominal only0.20 micron rhodium logged per lot, 3 microns on vermeilWear-through inside one season
Surface porosity after polishSeen after platingCast porosity checked before plating, rejects pulled at that stagePlating blister six weeks later

None of the four adds cost at USD 13-106. They add about 15 seconds per piece and remove the reason to inspect twice.

Cost Split on a Valentine Program Piece at USD 13-106

At USD 13-106 per piece for brooches and Pins, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.

Brooches & Pins setting and finish detail on a HOLYCOME factory sample
Cost lineShareWhat moves it
Base metal or alloy for brooches and Pins32%Alloy choice and casting yield
Stone or melee for brooches and Pins23%Sieve range and lot batching
Setting and finishing labor for brooches and Pins21%Jig design and bench minutes
Plating, polish and QC for brooches and Pins14%Per-tray versus per-piece checks
Packaging for brooches and Pins10%heart gift box

The saving in the cheapest quote hides in plating and stone grade. At 300 pieces that saving is visible in season two, certified IGI report and packed heart gift box at 300 pieces.

Terms Behind a Valentine Program Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 300-piece Valentine Program order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with IGI report and heart gift box stated on the same sheet.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 13-106 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the heart gift box format at 300 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and at USD 13-106 for 300 pieces that is the number the buyer signs.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of catch pull strength for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, certified IGI report and packed heart gift box at 300 pieces.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and 300 pieces leaves Wuzhou in heart gift box at USD 13-106.

Three Failures That Reach the Valentine Program Bench

catch strength

A safety catch that opens under fabric tension loses the piece. Catch tension needs a pull check, not a visual one, and 300 pieces leaves Wuzhou in heart gift box at USD 13-106.

Our countermeasure is a gauge and a written limit. It adds about 15 seconds per piece and removes the defect from the run rather than from the carton, which is how the Valentine Program account reads it at USD 13-106.

pin solder creep

A pin joined with soft solder creeps under load and tilts. Hard solder plus a mechanical seat holds it, the figure being USD 13-106 for a 300-piece run.

In a 300-piece run this typically shows on 17 of pieces. Catching it means measuring catch pull strength at the tray level, not inspecting the finished carton, with IGI report and heart gift box stated on the same sheet.

enamel pinholes

Enamel fired with trapped air shows pinholes after polish. Two thin coats beat one thick coat, which is USD 13-106 on the Valentine Program schedule.

The commercial effect is piece loss and replacement, typically USD 6-11 per brooch. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Valentine Program account reads it at USD 13-106.

AQL, Tray Checks and What a QC Report Should Say

Every year we see the same omission in brooches and Pins spec sheets, and every year it costs a buyer a season, certified IGI report and packed heart gift box at 300 pieces.

At 300 pieces the arithmetic on brooches and Pins changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, which is USD 13-106 on the Valentine Program schedule.

We quote both a first-run price and a reorder price for brooches and Pins on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, with IGI report and heart gift box stated on the same sheet.

Carton Cube, Duty and the Freight Line That Surprises Buyers

The number is less interesting than the rule behind it, and brooches and Pins is where that rule gets tested, and the Valentine Program quote for it sits at USD 13-106.

One practical note on timing for brooches and Pins: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, the figure being USD 13-106 for a 300-piece run.

We date the brooches and Pins proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, which the Valentine Program file records at USD 13-106 in heart gift box.

Valentine Window for brooches and Pins

The Valentine window is short and unforgiving: stock has to be in the warehouse by the last week of January or the season is gone. That puts the production order in the second week of December, ahead of the Lunar New Year slowdown, quoted at USD 13-106 per piece in heart gift box.

Paired designs move better than single pieces here. A matching pair of brooches and Pins, boxed together with two cards, converts at the same retail price as two singles and costs about nine percent more to make, certified IGI report and packed heart gift box at 300 pieces.

Photography has to be red-and-white neutral. A brooches and Pin shot on a red silk background reads as a gift in a listing thumbnail, and that is the only image most buyers will ever see, quoted at USD 13-106 per piece in heart gift box.

The Calendar Behind a Valentine Program Run

Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on brooches and Pins at USD 13-106.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, on a 300-piece Valentine Program order at USD 13-106.

The First Valentine Program Order

Start with three designs at 50 pieces each. That covers the 300 pieces you need to read sell-through without betting on one model, and 300 pieces leaves Wuzhou in heart gift box at USD 13-106.

Sample 3-5 days, bulk 15-20 days under 500 pieces, 300 pieces inside that window. The calendar is the same on every Valentine Program run, and 300 pieces leaves Wuzhou in heart gift box at USD 13-106.

Getting heart gift box to the US market

Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in the US market, with IGI report and heart gift box stated on the same sheet, and 300 pieces leaves Wuzhou in heart gift box at USD 13-106.

FOB is the default and DDP is the option. Buyers new to the US market usually take DDP once and then switch after they see the breakdown, priced at USD 13-106 for the 300-piece Valentine Program run.

At receiving, count cartons, weigh one tray and measure ten pieces against catch pull strength. Twenty minutes here saves a season of returns, and the Valentine Program quote for it sits at USD 13-106.

Frequently Asked Questions

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which the Valentine Program file records at USD 13-106 in heart gift box.

What is the minimum order for brooches and Pins?

50 pieces per brooches and Pin. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is how the Valentine Program account reads it at USD 13-106.

Do you supply certificates for brooches and Pins?

IGI report on brooches and Pins above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of catch pull strength, which is what a counter or a listing actually needs, and 300 pieces leaves Wuzhou in heart gift box at USD 13-106.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if catch strength shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which is how the Valentine Program account reads it at USD 13-106.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which the Valentine Program file records at USD 13-106 in heart gift box.

Next Step

If the USD 13-106 band fits the shelf, send a drawing and we quote the 300-piece Valentine Program run inside one business day.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across brooches and Pins and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, and 300 pieces leaves Wuzhou in heart gift box at USD 13-106.

Related reading: Brooches & Pins Made to Order: Carton Cube, Duty and the Freight Line That Surprises - HOLYCOME Hair Accessories Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME

Request Wholesale Quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Related Articles