Budget Earrings Distributor Tier: What the Quote Actually Covers - HOLYCOME
Budget Earrings · November 9, 2026 · 9 views

Budget Earrings Distributor Tier: What the Quote Actually Covers - HOLYCOME

What the Quote Actually Covers

Last August, a US buyer of budget Earrings placed 800 budget Earrings against a sample signed in January. The first container landed with 9 pieces that failed on nickel release alone, and USD 5-15 landed on the buyer's P&L before a single unit sold, which is USD 1-17 on the Distributor Tier schedule.

Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and nickel release is what a photograph fails to define, the figure being USD 1-17 for a 800-piece run.

Budget Earrings wholesale piece from the HOLYCOME line in Wuzhou

The fix cost about 8 seconds per budget Earring and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, shipped as bulk carton, 50 per bag and certified SGS batch report, which is USD 1-17 on the Distributor Tier schedule.

Where USD 1-17 Per Piece Actually Goes

Cost per piece at USD 1-17 leaves little room for assumption. The table shows which line compresses and which one only moves quality.

Cost lineShareWhat moves it
Base metal or alloy for budget Earrings30%Alloy choice and casting yield
Stone or melee for budget Earrings20%Sieve range and lot batching
Setting and finishing labor for budget Earrings19%Jig design and bench minutes
Plating, polish and QC for budget Earrings12%Per-tray versus per-piece checks
Packaging for budget Earrings19%bulk carton, 50 per bag

A factory with no bench minutes per piece has never costed budget Earrings at USD 1-17. Ask for minutes and for the reject rule.

What US buyers Check Before They Sign

Four lines decide whether budget Earrings at USD 1-17 sells through or comes back, and none of them appears on a typical trading-company quote.

Budget Earrings setting and finish detail on a HOLYCOME factory sample
Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Put these four into the purchase order and the Distributor Tier argument after delivery becomes arithmetic, shipped as bulk carton, 50 per bag and certified SGS batch report.

Distributor Pricing Tiers on budget Earrings

A distributor does not buy a budget Earring, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, which the Distributor Tier file records at USD 1-17 in bulk carton, 50 per bag.

What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, on a 800-piece Distributor Tier order at USD 1-17.

Turn is the number the distributor manages. At USD 1-17 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of budget Earrings move in 800-piece lots rather than in the 50-piece sample quantity.

The Three Failures We See Most in Incoming Samples

nickel release

EU and some US buyers require nickel-release compliance. A plating bath that passes on day one can fail after a barrel top-up, priced at USD 1-17 for the 800-piece Distributor Tier run.

The commercial effect is chargebacks and listing takedowns, typically USD 2-5 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 1-17.

plating thickness drift

A 3 micron layer survives a season; a 1.5 micron layer does not. Thickness is measurable and should be stated per batch, quoted at USD 1-17 per piece in bulk carton, 50 per bag.

Our countermeasure is a gauge and a written limit. It adds about 8 seconds per piece and removes the defect from the run rather than from the carton, on a 800-piece Distributor Tier order at USD 1-17.

stone setting speed

Glue-set stones that pool adhesive above the seat photograph as a white dot. Recessed seats fix it at the bench, priced at USD 1-17 for the 800-piece Distributor Tier run.

In a 800-piece run this typically shows on 8 of pieces. Catching it means measuring plating thickness per batch at the tray level, not inspecting the finished carton, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 1-17 for a 800-piece run.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 1-17 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Distributor Tier file records at USD 1-17 in bulk carton, 50 per bag.

Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of plating thickness per batch for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, quoted at USD 1-17 per piece in bulk carton, 50 per bag.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, quoted at USD 1-17 per piece in bulk carton, 50 per bag.

Sample to Container: The Real Calendar

Ask three suppliers of budget Earrings this question and you will get three answers. Only one of them survives an inspection, and the Distributor Tier quote for it sits at USD 1-17.

One practical note on timing for budget Earrings: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

We date the budget Earrings proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

AQL, Tray Checks and What a QC Report Should Say

On budget Earrings, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, priced at USD 1-17 for the 800-piece Distributor Tier run.

In North American retail terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For budget Earrings, we publish the figure per SKU and hold it for the order window rather than for the calendar year, priced at USD 1-17 for the 800-piece Distributor Tier run.

Practically, it shows up in three places for budget Earrings: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, priced at USD 1-17 for the 800-piece Distributor Tier run.

How a Repeat Order Gets Built

The sequence below is fixed for a Distributor Tier run. The dates move with the stone lot, not with the shipping season, which the Distributor Tier file records at USD 1-17 in bulk carton, 50 per bag.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Distributor Tier shipment, which the Distributor Tier file records at USD 1-17 in bulk carton, 50 per bag.

Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 1-17.

For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, which is how the Distributor Tier account reads it at USD 1-17.

Check the count, the weight and plating thickness per batch and nickel release compliance before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, which the Distributor Tier file records at USD 1-17 in bulk carton, 50 per bag.

What This Means for a First Order

A first Distributor Tier order of 50 pieces per design at USD 1-17 is a test of the line, not a commitment to the range.

Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, shipped as bulk carton, 50 per bag and certified SGS batch report.

Frequently Asked Questions

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white budget Earrings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, on a 800-piece Distributor Tier order at USD 1-17.

How is budget Earrings packed for bulk carton, 50 per bag?

Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is how the Distributor Tier account reads it at USD 1-17.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, shipped as bulk carton, 50 per bag and certified SGS batch report.

How long does a reorder of the same budget Earring take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which the Distributor Tier file records at USD 1-17 in bulk carton, 50 per bag.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white budget Earrings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, on a 800-piece Distributor Tier order at USD 1-17.

Next Step

The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Distributor Tier, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, and at USD 1-17 for 800 pieces that is the number the buyer signs.

Related reading: Budget Earrings Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME Bracelets & Bangles Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME

Request Wholesale Quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Related Articles