Bulk Mix Lots Bridal Boutique: The Reject Tray Policy That Decides a Partnership - HOLYCOME
Bulk Mix Lots · November 9, 2026 · 8 views

Bulk Mix Lots Bridal Boutique: The Reject Tray Policy That Decides a Partnership - HOLYCOME

Why the Bridal Boutique Quote Looks Cheap Until It Lands

Two buyers ordered the same bulk Mix Lot in the same month. One paid 9% less and absorbed 23 rejects out of 50 pieces; the other paid our quote and shipped clean. The difference was nickel release, and it was measurable on both benches, certified IGI report and packed two-piece bridal box at 50 pieces.

The defect did not surprise us. Nickel release is the predictable output of a run where nobody wrote the tolerance down, and it is the first measurement we take on an incoming bulk Mix Lot, which the Bridal Boutique file records at USD 2-20 in two-piece bridal box.

Bulk Mix Lots wholesale piece from the HOLYCOME line in Wuzhou

We did not discount the quote. We changed the gauge, the seat cut, the plating log and the tray rule, and the second run shipped with zero rejects on plating thickness per batch and nickel release compliance, quoted at USD 2-20 per piece in two-piece bridal box.

The Measurements Behind a USD 2-20 Quote

Price is the first thing compared and the last thing that matters. These four measurements decide the return rate on bulk Mix Lots, and three of them cost nothing to specify, certified IGI report and packed two-piece bridal box at 50 pieces, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 2-20.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit
Plating thicknessNominal only0.20 micron rhodium logged per lot, 3 microns on vermeilWear-through inside one season
Surface porosity after polishSeen after platingCast porosity checked before plating, rejects pulled at that stagePlating blister six weeks later

Each line is a gauge, not a slogan. A supplier who cannot quote a number for nickel release is quoting an opinion about bulk Mix Lots, the figure being USD 2-20 for a 50-piece run.

What Fails First on bulk Mix Lots

stone setting speed

Glue-set stones that pool adhesive above the seat photograph as a white dot. Recessed seats fix it at the bench, which is USD 2-20 on the Bridal Boutique schedule.

Bulk Mix Lots setting and finish detail on a HOLYCOME factory sample

Our countermeasure is a gauge and a written limit. It adds about 8 seconds per piece and removes the defect from the run rather than from the carton, shipped as two-piece bridal box and certified IGI report.

nickel release

EU and some US buyers require nickel-release compliance. A plating bath that passes on day one can fail after a barrel top-up, which is USD 2-20 on the Bridal Boutique schedule.

In a 50-piece run this typically shows on 14 of pieces. Catching it means measuring plating thickness per batch at the tray level, not inspecting the finished carton, priced at USD 2-20 for the 50-piece Bridal Boutique run.

plating thickness drift

A 3 micron layer survives a season; a 1.5 micron layer does not. Thickness is measurable and should be stated per batch, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 2-20.

The commercial effect is chargebacks and listing takedowns, typically USD 2-5 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, with IGI report and two-piece bridal box stated on the same sheet.

What a USD 2-20 Quote Hides

The Bridal Boutique price of 50 pieces splits as below. The line buyers challenge is labor, and it is the line that decides the second season, which is how the Bridal Boutique account reads it at USD 2-20.

Cost lineShareWhat moves it
Base metal or alloy for bulk Mix Lots34%Alloy choice and casting yield
Stone or melee for bulk Mix Lots25%Sieve range and lot batching
Setting and finishing labor for bulk Mix Lots22%Jig design and bench minutes
Plating, polish and QC for bulk Mix Lots15%Per-tray versus per-piece checks
Packaging for bulk Mix Lots4%two-piece bridal box

Break the USD 2-20 quote into these five lines and the comparison stops being rhetorical.

MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Bridal Boutique order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, quoted at USD 2-20 per piece in two-piece bridal box.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 2-20 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the two-piece bridal box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and at USD 2-20 for 50 pieces that is the number the buyer signs.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of plating thickness per batch for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and at USD 2-20 for 50 pieces that is the number the buyer signs.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 2-20.

Bridal Boutique Consignment and the Sample Tray

A bridal account buys a sample tray first and stock later. The tray has to cover the sizes the boutique actually fits, which in practice means one sample in each half size from five to eight, so eight pieces per design rather than one, which the Bridal Boutique file records at USD 2-20 in two-piece bridal box.

Consignment terms change what you order. A boutique that takes bulk Mix Lots on consignment wants a marked retail price on the tag, an exchange window, and a certificate in the box the bride can photograph. We supply the IGI report in a card sleeve for exactly that reason, quoted at USD 2-20 per piece in two-piece bridal box.

The calendar matters more than the price. Brides buy between January and April for a summer wedding, so the tray has to be on the counter by December. A March order arrives after the decision has already been made, which is how the Bridal Boutique account reads it at USD 2-20.

MOQ, Mixed Designs and the Real First Order

It is not a marketing point on bulk Mix Lots. It is the number that decides whether the second order happens, priced at USD 2-20 for the 50-piece Bridal Boutique run.

The buyers who get the most out of bulk Mix Lots treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, certified IGI report and packed two-piece bridal box at 50 pieces.

We support it directly on bulk Mix Lots: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, on a 50-piece Bridal Boutique order at USD 2-20.

Sample to Container: The Real Calendar

Buyers who have run three programs on bulk Mix Lots know this instinctively; first-time buyers learn it the expensive way, which is USD 2-20 on the Bridal Boutique schedule.

What buyers underestimate on bulk Mix Lots is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, the figure being USD 2-20 for a 50-piece run.

We plan a 3-5% buffer on first runs of bulk Mix Lots and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, which is USD 2-20 on the Bridal Boutique schedule.

The Dock Check on bulk Mix Lots

Air lands in 5-8 days to the US west coast and sea takes three times the transit. At USD 2-20 per piece the choice is a cash-flow decision.

DDP is available for US accounts that want duty and clearance on our side, and it removes the invoice that arrives after the carton clears, priced at USD 2-20 for the 50-piece Bridal Boutique run.

On arrival, weigh a tray and measure ten pieces. Anything outside the band is a claim with evidence rather than a difference of opinion, and the Bridal Boutique quote for it sits at USD 2-20.

From Spec to two-piece bridal box

On 50 pieces of bulk Mix Lots the calendar starts at the signed spec, not at the deposit, and it ends with two-piece bridal box on a pallet, shipped as two-piece bridal box and certified IGI report.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

A 50-piece first order at USD 2-20 is a measurement of plating thickness per batch, not a commitment to the range.

A 50-Piece Test Run

A test run at 50 pieces tells you three things: whether nickel release is controlled, whether packing survives freight, and whether the count is honest, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 2-20.

Put the reject rule in writing before the deposit. The Bridal Boutique conversation after arrival is shorter when the rule is already on the order, which is USD 2-20 on the Bridal Boutique schedule.

Frequently Asked Questions

Do you supply certificates for bulk Mix Lots?

IGI report on bulk Mix Lots above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of plating thickness per batch, which is what a counter or a listing actually needs, with IGI report and two-piece bridal box stated on the same sheet.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if nickel release shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, certified IGI report and packed two-piece bridal box at 50 pieces.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which the Bridal Boutique file records at USD 2-20 in two-piece bridal box.

What is the minimum order for bulk Mix Lots?

50 pieces per bulk Mix Lot. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which the Bridal Boutique file records at USD 2-20 in two-piece bridal box.

Do you supply certificates for bulk Mix Lots?

IGI report on bulk Mix Lots above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of plating thickness per batch, which is what a counter or a listing actually needs, with IGI report and two-piece bridal box stated on the same sheet.

Next Step

Send a photo or a drawing of the piece you want in two-piece bridal box. We answer with a price, a calendar and the four measurements above, certified IGI report and packed two-piece bridal box at 50 pieces.

The factory behind bulk Mix Lots here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, and the Bridal Boutique quote for it sits at USD 2-20.

Related reading: Bulk Mix Lots Distributor Tier: What the Quote Actually Covers - HOLYCOME Alloy Rings Amazon FBA Ready: The Sample Approval That Survives Production - HOLYCOME

Request Wholesale Quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Related Articles