Why the Distributor Tier Quote Looks Cheap Until It Lands
In March, a US buyer of bulk Mix Lots ordered 800 bulk Mix Lots and asked for the same cast or stamped as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, and at USD 1-17 for 800 pieces that is the number the buyer signs.
Nothing in that rejection was exotic. At USD 1-17 per piece and 800 pieces on the order, a nickel release rate of two percent is a costing error rather than a quality mystery.
Cost of the fix was about 8 seconds per piece. On 800 pieces that is a few hours at the bench and the whole claim file disappears, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
What a USD 1-17 Quote Hides
The cost of a bulk Mix Lot in the USD 1-17 band splits roughly as below. The line buyers challenge most is labor, and it is the line that decides whether the piece survives a season.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for bulk Mix Lots | 34% | Alloy choice and casting yield |
| Stone or melee for bulk Mix Lots | 25% | Sieve range and lot batching |
| Setting and finishing labor for bulk Mix Lots | 22% | Jig design and bench minutes |
| Plating, polish and QC for bulk Mix Lots | 15% | Per-tray versus per-piece checks |
| Packaging for bulk Mix Lots | 4% | bulk carton, 50 per bag |
If a supplier will not break out the five lines above, the number you are comparing is not a price. It is a total that somebody else assembled from assumptions, the figure being USD 1-17 for a 800-piece run.
The Measurements Behind a USD 1-17 Quote
Four numbers separate a 800-piece run that clears inspection from one that generates a credit note. None of them appears on the sample photo, and at USD 1-17 for 800 pieces that is the number the buyer signs.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
None of these are premium features. They cost seconds per piece and they remove the reason a buyer has to inspect twice, quoted at USD 1-17 per piece in bulk carton, 50 per bag.
Distributor Pricing Tiers on bulk Mix Lots
A distributor does not buy a bulk Mix Lot, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Turn is the number the distributor manages. At USD 1-17 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of bulk Mix Lots move in 800-piece lots rather than in the 50-piece sample quantity.
What Fails First on bulk Mix Lots
nickel release
EU and some US buyers require nickel-release compliance. A plating bath that passes on day one can fail after a barrel top-up, shipped as bulk carton, 50 per bag and certified SGS batch report.
In a 800-piece run this typically shows on 8 of pieces. Catching it means measuring plating thickness per batch at the tray level, not inspecting the finished carton, the figure being USD 1-17 for a 800-piece run.
plating thickness drift
A 3 micron layer survives a season; a 1.5 micron layer does not. Thickness is measurable and should be stated per batch, priced at USD 1-17 for the 800-piece Distributor Tier run.
The commercial effect is chargebacks and listing takedowns, typically USD 2-5 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is USD 1-17 on the Distributor Tier schedule.
stone setting speed
Glue-set stones that pool adhesive above the seat photograph as a white dot. Recessed seats fix it at the bench, shipped as bulk carton, 50 per bag and certified SGS batch report.
Our countermeasure is a gauge and a written limit. It adds about 8 seconds per piece and removes the defect from the run rather than from the carton, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 1-17.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 1-17 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of plating thickness per batch for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, priced at USD 1-17 for the 800-piece Distributor Tier run.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, priced at USD 1-17 for the 800-piece Distributor Tier run.
Sample to Container: The Real Calendar
This is the question that separates a trading company from a factory, and on bulk Mix Lots the answer is usually shorter than buyers expect, which is how the Distributor Tier account reads it at USD 1-17.
One practical note on timing for bulk Mix Lots: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, shipped as bulk carton, 50 per bag and certified SGS batch report.
We date the bulk Mix Lots proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, and at USD 1-17 for 800 pieces that is the number the buyer signs.
AQL, Tray Checks and What a QC Report Should Say
Buyers ask it in the first call about bulk Mix Lots and rarely get a number they can put in a spreadsheet, quoted at USD 1-17 per piece in bulk carton, 50 per bag.
In North American retail terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For bulk Mix Lots, we publish the figure per SKU and hold it for the order window rather than for the calendar year, priced at USD 1-17 for the 800-piece Distributor Tier run.
Practically, it shows up in three places for bulk Mix Lots: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, shipped as bulk carton, 50 per bag and certified SGS batch report.
From Spec to bulk carton, 50 per bag
The calendar below is what we quote on a 800-piece Distributor Tier run of bulk Mix Lots. It starts when the spec is signed, not when the deposit clears, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
A first order of 50 pieces is a measurement, not a purchase. It tells you what plating thickness per batch looks like from this bench, and at USD 1-17 for 800 pieces that is the number the buyer signs.
The Dock Check on bulk Mix Lots
We ship from Guangzhou or Shenzhen and pick the port on the carrier rate, not on habit. SGS batch report travels with the shipping documents, which is how the Distributor Tier account reads it at USD 1-17.
DDP removes the duty invoice that arrives after the carton clears, which matters on a first Distributor Tier order at USD 1-17.
Three steps at the dock: count against the packing list, weigh a sample tray, measure ten pieces. None needs a lab, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, quoted at USD 1-17 per piece in bulk carton, 50 per bag.
A 800-Piece Test Run
At 800 pieces inside bulk carton, 50 per bag, the first order reads sell-through without betting the season on one model, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Buyers who run that measurement before committing a season usually keep the supplier. Buyers who skip it usually pay twice for the same lesson, and the Distributor Tier quote for it sits at USD 1-17.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white bulk Mix Lots, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is USD 1-17 on the Distributor Tier schedule.
How is bulk Mix Lots packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, on a 800-piece Distributor Tier order at USD 1-17.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is how the Distributor Tier account reads it at USD 1-17.
How long does a reorder of the same bulk Mix Lot take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white bulk Mix Lots, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is USD 1-17 on the Distributor Tier schedule.
Next Step
If you are quoting bulk Mix Lots against another supplier, send that quote. We will mark the four lines where the numbers diverge and let you decide, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 1-17.
The factory behind bulk Mix Lots here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Related reading: Bulk Mix Lots Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME Alloy Rings Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME