How the Second Order Becomes Cheaper
Last May, a US buyer of bulk Mix Lots placed 100 bulk Mix Lots against a sample signed in September. The first container landed with 9 pieces that failed on nickel release alone, and USD 5-15 landed on the buyer's P&L before a single unit sold, priced at USD 2-18 for the 100-piece Shopify DTC run.
Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and nickel release is what a photograph fails to define, which is how the Shopify DTC account reads it at USD 2-18.
The fix cost about 8 seconds per bulk Mix Lot and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, which the Shopify DTC file records at USD 2-18 in gift box with sleeve.
Running bulk Mix Lots as a Storefront SKU
A storefront lives on photography and return rate, not on the wholesale price. The same bulk Mix Lot that sells at a boutique counter needs a second and third angle, a scale reference, and one photograph of the clasp or gallery because that is the part a customer cannot see before buying, which is USD 2-18 on the Shopify DTC schedule.
Returns on jewellery from a storefront cluster around sizing and expectation, not quality. Publishing the millimetre width and the exact gram weight cuts the sizing return before it happens, and a printed care card inside the gift box with sleeve cuts the tarnish complaint, the figure being USD 2-18 for a 100-piece run.
Shipping weight decides whether you can offer free carriage. At 100 pieces a mixed carton of bulk Mix Lots usually breaks into individual mailers under four ounces, which keeps a USPS or carrier rate flat instead of dimensional, the figure being USD 2-18 for a 100-piece run.
What US buyers Check Before They Sign
Four lines decide whether bulk Mix Lots at USD 2-18 sells through or comes back, and none of them appears on a typical trading-company quote.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
Put these four into the purchase order and the Shopify DTC argument after delivery becomes arithmetic, with IGI report and gift box with sleeve stated on the same sheet.
The Three Failures We See Most in Incoming Samples
plating thickness drift
A 3 micron layer survives a season; a 1.5 micron layer does not. Thickness is measurable and should be stated per batch, and the Shopify DTC quote for it sits at USD 2-18.
Our countermeasure is a gauge and a written limit. It adds about 8 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 2-18 for a 100-piece run.
stone setting speed
Glue-set stones that pool adhesive above the seat photograph as a white dot. Recessed seats fix it at the bench, and at USD 2-18 for 100 pieces that is the number the buyer signs.
In a 100-piece run this typically shows on 11 of pieces. Catching it means measuring plating thickness per batch at the tray level, not inspecting the finished carton, on a 100-piece Shopify DTC order at USD 2-18.
nickel release
EU and some US buyers require nickel-release compliance. A plating bath that passes on day one can fail after a barrel top-up, and at USD 2-18 for 100 pieces that is the number the buyer signs.
The commercial effect is chargebacks and listing takedowns, typically USD 2-5 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, on a 100-piece Shopify DTC order at USD 2-18.
Where USD 2-18 Per Piece Actually Goes
Cost per piece at USD 2-18 leaves little room for assumption. The table shows which line compresses and which one only moves quality.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for bulk Mix Lots | 30% | Alloy choice and casting yield |
| Stone or melee for bulk Mix Lots | 20% | Sieve range and lot batching |
| Setting and finishing labor for bulk Mix Lots | 19% | Jig design and bench minutes |
| Plating, polish and QC for bulk Mix Lots | 12% | Per-tray versus per-piece checks |
| Packaging for bulk Mix Lots | 19% | gift box with sleeve |
A factory with no bench minutes per piece has never costed bulk Mix Lots at USD 2-18. Ask for minutes and for the reject rule.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Shopify DTC order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 2-18.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 2-18 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the gift box with sleeve format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is USD 2-18 on the Shopify DTC schedule.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of plating thickness per batch for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, shipped as gift box with sleeve and certified IGI report.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and the Shopify DTC quote for it sits at USD 2-18.
What the Quote Actually Covers
Every year we see the same omission in bulk Mix Lots spec sheets, and every year it costs a buyer a season, which the Shopify DTC file records at USD 2-18 in gift box with sleeve.
What buyers underestimate on bulk Mix Lots is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, certified IGI report and packed gift box with sleeve at 100 pieces.
We plan a 3-5% buffer on first runs of bulk Mix Lots and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, and at USD 2-18 for 100 pieces that is the number the buyer signs.
MOQ, Mixed Designs and the Real First Order
The number is less interesting than the rule behind it, and bulk Mix Lots is where that rule gets tested, and at USD 2-18 for 100 pieces that is the number the buyer signs.
The commercial version of this question for bulk Mix Lots is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, which is USD 2-18 on the Shopify DTC schedule.
That clause matters more than a discount on bulk Mix Lots. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, with IGI report and gift box with sleeve stated on the same sheet.
What This Means for a First Order
A first Shopify DTC order of 50 pieces per design at USD 2-18 is a test of the line, not a commitment to the range.
Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 2-18.
How a Repeat Order Gets Built
The sequence below is fixed for a Shopify DTC run. The dates move with the stone lot, not with the shipping season, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 2-18.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Shopify DTC shipment, shipped as gift box with sleeve and certified IGI report.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, on a 100-piece Shopify DTC order at USD 2-18.
For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, with IGI report and gift box with sleeve stated on the same sheet, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 2-18.
Check the count, the weight and plating thickness per batch and nickel release compliance before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, priced at USD 2-18 for the 100-piece Shopify DTC run.
Frequently Asked Questions
How long does a reorder of the same bulk Mix Lot take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, priced at USD 2-18 for the 100-piece Shopify DTC run.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white bulk Mix Lots, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, on a 100-piece Shopify DTC order at USD 2-18.
How is bulk Mix Lots packed for gift box with sleeve?
Every unit goes into a foam-backed pouch, then the gift box with sleeve, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, the figure being USD 2-18 for a 100-piece run.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which the Shopify DTC file records at USD 2-18 in gift box with sleeve.
How long does a reorder of the same bulk Mix Lot take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, priced at USD 2-18 for the 100-piece Shopify DTC run.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Shopify DTC, and the Shopify DTC quote for it sits at USD 2-18.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, quoted at USD 2-18 per piece in gift box with sleeve.
Related reading: Bulk Mix Lots Bridal Boutique: The Reject Tray Policy That Decides a Partnership - HOLYCOME Alloy Rings Vermeil Upgrade: What a Report Proves and What It Does Not - HOLYCOME