Alloy, Karat and the Cost of a Color Change
The brief was simple: 200 jewelry Sets, matched metal and stone across two or three pieces, delivered before May. The run that arrived carried 17 pieces with metal lot mismatch, and the buyer spent USD 40-150 on sorting before the goods reached a shelf, the figure being USD 78-504 for a 200-piece run.
On a 200-piece order at USD 78-504, a metal lot mismatch rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.
Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, and the Private Label Carton quote for it sits at USD 78-504.
What US buyers Check Before They Sign
At USD 78-504 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Write these into the Private Label Carton purchase order and the arrival check becomes arithmetic instead of recollection, which is USD 78-504 on the Private Label Carton schedule.
Private Label Packaging for jewelry Sets
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, certified GRA report and packed private-label carton with hangtag at 200 pieces.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin jewelry Set. Below 0.8 mm of shank width we recommend the hangtag only, and the Private Label Carton quote for it sits at USD 78-504.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, and at USD 78-504 for 200 pieces that is the number the buyer signs.
Where USD 78-504 Per Piece Actually Goes
Cost at USD 78-504 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for jewelry Sets | 30% | Alloy choice and casting yield |
| Stone or melee for jewelry Sets | 20% | Sieve range and lot batching |
| Setting and finishing labor for jewelry Sets | 19% | Jig design and bench minutes |
| Plating, polish and QC for jewelry Sets | 12% | Per-tray versus per-piece checks |
| Packaging for jewelry Sets | 19% | private-label carton with hangtag |
A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, quoted at USD 78-504 per piece in private-label carton with hangtag.
The Three Failures We See Most in Incoming Samples
box fit
A set that does not sit flat in its box photographs badly and arrives with a shifted piece. Box tolerance is part of the product, and at USD 78-504 for 200 pieces that is the number the buyer signs.
In a 200-piece run this typically shows on 17 of pieces. Catching it means measuring cross-piece color match at the tray level, not inspecting the finished carton, which is how the Private Label Carton account reads it at USD 78-504.
metal lot mismatch
A set assembled from two casting lots shows a tonal step between the ring and the pendant under daylight. One lot per set is the rule, certified GRA report and packed private-label carton with hangtag at 200 pieces.
The commercial effect is piece replacement and a box reship, typically USD 18-30 per set. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is USD 78-504 on the Private Label Carton schedule.
stone count variance
A halo set quoting 42 stones that ships with 38 reads as a downgrade. Count per piece, not per order, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 78-504.
Our countermeasure is a gauge and a written limit. It adds about 28 seconds per piece and removes the defect from the run rather than from the carton, which is how the Private Label Carton account reads it at USD 78-504.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and the Private Label Carton quote for it sits at USD 78-504.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 78-504 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, certified GRA report and packed private-label carton with hangtag at 200 pieces.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of cross-piece color match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which the Private Label Carton file records at USD 78-504 in private-label carton with hangtag.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, on a 200-piece Private Label Carton order at USD 78-504.
The Sample Approval That Survives Production
The short version for jewelry Sets: it is arithmetic, not relationship. The long version is below, on a 200-piece Private Label Carton order at USD 78-504.
The commercial version of this question for jewelry Sets is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, which is how the Private Label Carton account reads it at USD 78-504.
That clause matters more than a discount on jewelry Sets. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 78-504.
How the Second Order Becomes Cheaper
Every year we see the same omission in jewelry Sets spec sheets, and every year it costs a buyer a season, and at USD 78-504 for 200 pieces that is the number the buyer signs.
We run this check per tray rather than per carton because the defect that matters on jewelry Sets is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, on a 200-piece Private Label Carton order at USD 78-504.
The report the buyer receives states the count per tray, the measured average and the outlier count for jewelry Sets. It is deliberately unglamorous, and it is the document that settles most disputes before they start, and the Private Label Carton quote for it sits at USD 78-504.
How a Repeat Order Gets Built
Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, certified GRA report and packed private-label carton with hangtag at 200 pieces, shipped as private-label carton with hangtag and certified GRA report.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, the figure being USD 78-504 for a 200-piece run.
What This Means for a First Order
A first Private Label Carton order of 50 pieces per design at USD 78-504 tests the line rather than the range. Three designs covers the shelf.
Ask for the retained tray and the GRA report batch sheet with the first shipment. Both are free and both decide the reorder, with GRA report and private-label carton with hangtag stated on the same sheet.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, shipped as private-label carton with hangtag and certified GRA report, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 78-504.
FOB is the default on jewelry Sets and DDP is the option. Buyers new to the American bridal market usually take DDP once, then switch after they see the breakdown, and at USD 78-504 for 200 pieces that is the number the buyer signs.
If metal lot mismatch appears in the arrival check, the retained tray decides who owns it. Keep the GRA report batch sheet in the same folder as the packing list, certified GRA report and packed private-label carton with hangtag at 200 pieces.
Frequently Asked Questions
What is the minimum order for jewelry Sets?
50 pieces per jewelry Set. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, the figure being USD 78-504 for a 200-piece run.
Do you supply certificates for jewelry Sets?
GRA report on jewelry Sets above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of cross-piece color match, which is what a counter or a listing actually needs, quoted at USD 78-504 per piece in private-label carton with hangtag.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if metal lot mismatch shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, with GRA report and private-label carton with hangtag stated on the same sheet.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, priced at USD 78-504 for the 200-piece Private Label Carton run.
What is the minimum order for jewelry Sets?
50 pieces per jewelry Set. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, the figure being USD 78-504 for a 200-piece run.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070, subject Private Label Carton, with GRA report and private-label carton with hangtag stated on the same sheet.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 78-504.
Related reading: Brooches & Pins Vermeil Upgrade: What a Report Proves and What It Does Not - HOLYCOME Brooches & Pins Valentine Program: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME