Why your first landed cost number is usually wrong
Most buyers price a first bracelets bangles wholesale order off the unit quote and stop there. Then the invoice lands and the number is 20 to 35 percent higher than the spreadsheet said. I have watched this happen on our own floor for twelve years, usually because freight, duty, deposit timing and rejected units were never put on the same page.
This is not a how-to-choose piece. It is the arithmetic I walk buyers through before we cut a single PO, using a real first-order size and real numbers from our line.
One thing up front: we run a factory, not a trading desk. That is why our cost, speed and yield land roughly 20% better than typical trading companies on the same spec. No middle margin, no second-hand scheduling, no re-inspection pass-through. The math below reflects that.
Start with the ex-works unit price and what sits inside it
For 925 silver bangles with 3mm moissanite accents, a realistic first-order ex-works band is USD 6.80 to 11.50 per piece depending on silver weight and setting labor. Plated brass versions run USD 1.90 to 3.40. These are factory-gate numbers, before anything moves.
Inside that unit price you are paying for four things: metal, stones, labor and QC time. Buyers usually only see the first two. The QC slice is small per piece but it is the reason your reorder does not come back different from your first order.
- Silver or brass weight, priced at the day's metal fix plus a small fabrication premium
- Moissanite at GRA-grade selection, sorted by color and clarity before setting
- Setting and polishing labor, the biggest variable between simple and complex bangles
- In-process inspection and pre-ship AQL sampling time
- Packaging, poly bag and pouch, quoted separately if you want custom branding
The full landed cost stack, line by line
Here is the table I actually send to first-time buyers. It uses 300 pieces of a 925 silver moissanite bangle at USD 8.40 ex-works, shipping to a US East Coast warehouse.
| Cost line | Basis | Amount (USD) | Per piece (USD) |
|---|---|---|---|
| Goods, ex-works | 300 pcs x 8.40 | 2,520.00 | 8.40 |
| Export packing and docs | Flat | 85.00 | 0.28 |
| Air freight to door | DDP, 5-8 days | 410.00 | 1.37 |
| Duty and import clearance | Included in DDP rate | 0.00 | 0.00 |
| Payment fees | T/T and FX spread | 62.00 | 0.21 |
| QC shortfall allowance | 1.5% of units | 38.00 | 0.13 |
| Landed total | 3,115.00 | 10.39 |
Note the last row. Your real cost per sellable piece is 10.39, not 8.40. That is a 23.7 percent gap, and it is normal. Plan your retail or wholesale margin off the landed number, never the quote.
Where DDP changes the picture for small first orders
On 300 pieces, DDP at 5-8 days door-to-door is almost always the right call. You pay one number, we handle clearance, and duty is baked in. The alternative, FOB plus your own forwarder, only wins once you pass roughly 1,500 pieces or start consolidating several suppliers into one container.
If you are testing the market, DDP keeps your first order simple and your cash visible. You know the total before the goods leave Shenzhen.
Buyers who model duty and freight into the unit price from day one reorder at twice the rate of buyers who treat them as a surprise. The product did not change. The margin did.
Deposit terms and how they hit your cash flow
Standard terms are T/T 30% deposit with the balance against the pre-shipment inspection report. For a 3,115 dollar landed order, that is 756 dollars down and the rest at approval. PayPal works for samples and for first orders under about 500 dollars, at a slightly higher fee, which is why we quote it separately.
Lead time on a custom bangle run is 12-18 days in production after deposit and artwork sign-off. Stock items ship in 2-3 days. MOQ is 1 piece on stock and 30 pieces for custom specs, so a first order can be small and still carry your own logo tag.
The three QC stages that protect the landed number
Every shortfall allowance in that table exists because something occasionally fails. We run three gates so the failure is caught before it becomes freight.
Incoming stone check
Moissanite arrives in parcels and gets sorted for color and clarity against the GRA specification before it touches a setting. Stones that miss get pulled, not downgraded into your order.
In-process inspection
Each bangle is checked after setting and again after polishing for prong lift, hinge play on hinged styles, and sizing against the approved sample. This is where most defects are stopped.
Pre-ship AQL sampling
Before packing we pull an AQL sample to the agreed level and send you the report with photos. Certificates go in the box: GRA for the stones, IGI available on request for lab-grown diamond pieces. If the sample fails, we rework before it ships, and you never see the freight cost of a bad batch.
Three levers that cut your per-piece cost fastest
- Raise quantity in steps, not guesses. Moving 300 to 600 pieces typically drops the ex-works unit 8 to 12 percent because setup spreads out.
- Simplify the setting. A four-prong accent versus a bezel halo can be 1.40 dollars per piece in labor alone.
- Accept a stock clasp and standard sizing. Custom clasps add tooling and days, and days are money on a first order.
- Consolidate styles into one shipment. Freight is per shipment, not per SKU, so three styles in one box dilute the freight per piece.
Our 20% edge over trading companies shows up here too. Because stones, setting and QC sit under one roof, a spec change does not trigger a new supplier quote and a new lead time. You get one revised number, usually same day, on WhatsApp at +86 133 7744 7107.
Frequently Asked Questions
What is the MOQ for a first bracelets bangles wholesale order?
Stock styles start at 1 piece, and custom specs start at 30 pieces per design. Mixed styles can ship together, so a first order can stay small while still carrying your own tag.
How long does production and delivery take?
Custom production runs 12-18 days after deposit and sample approval, and stock ships in 2-3 days. DDP delivery adds 5-8 days to your door, with duty and clearance included in the quoted rate.
How is the price basis calculated and quoted?
We quote ex-works per piece against a stated quantity, metal weight and stone grade, then give you a DDP landed figure on top. Ask for both numbers so you can compare suppliers on the same footing.
Send your target quantity, style reference and destination zip to service@holycome.com, and I will send back a line-by-line landed cost sheet plus sample options, usually within one working day.